Spec Sheet

Description
Altronix Trove Software House kits are pre-assembled and consist of Trove enclosure
and backplane with factory installed Altronix power supply/charger(s) and sub-
assemblies. These kits also accommodate various combinations of Software House
boards for up to sixteen (16) doors in a single enclosure. Trove simplifies board
layout and wire management, reduces installation time and labor costs.
- Accommodates the following Software House controllers:
iStar Ultra GCM and iStar Ultra ACM boards or
iSTAR Pro GCM and iSTAR ACM SE/PRO ACM boards,
as well as I8, R8, and I8-CSI boards.
- Convenient knockout configuration.
- 16 AWG galvanized steel backplane simplifies board layout and
wire management.
- Filtered and electronically regulated outputs.
- Thermal and short circuit protection with auto reset.
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- Built-in charger(s) for sealed lead acid or gel type batteries.
- Instantaneous transfer to stand-by batteries.
- AC input and DC output LED indicators.
- Enclosure accommodates up to four (4) 12VDC/12AH batteries.
- Lifetime Warranty* / Made in the U.S.A.
Trove / Software House Kits (PTC)
Access & Power Integration Solution
Rev. TroveSH Kits PTC - 03122018
Key Features
T2SK7F8D
Trove Software House Kit Components Reference Chart
Altronix
Model
Number
Maximum
Number of Doors
Accommodated
Power Supplies
Access
Power
Controllers
Voltage
Regulator
Dual Input
Power Distribution
Module
Power
Distribution
Module
Rocker
Switch
Power
Supply 1
Power
Supply 2
T2SK7F8D
8
eFlow104NB ----
ACM8CB
VR6 PDS8CB ---- 1
T3SK75F8D
eFlow104NB eFlow102NB ---- ---- PD8ULCB 2
T3SK75F16D
16 Two (2) ACM8CB
*Altronix Power Supply/Chargers and Sub-Assemblies only