Installation Guide

- 4 - TSH Kits D
T2SK7F8D: Configuration of Software House iSTAR Pro Boards
1. Align the Software House boards on the backplane to match the boards’ mounting holes with corresponding pems.
2. Fasten provided standoffs to pems that match the hole pattern for Software House iSTAR Pro GCM, iSTAR ACM SE/PRO ACM,
and /or I8, R8, I8-CSI boards (Fig. 3, 3a, pg. 4).
3. Mount Software House boards to standoffs utilizing provided 5/16” pan head screws (Fig. 3a, pg. 4).
Note: Software House iSTAR ACM SE/PRO ACM boards have one (1) USB port each.
Please orient boards in the appropriate position according to the Fig. 3 below.
4. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Software House
iSTAR Pro GCM
Software House
iSTAR ACM SE/PRO ACM
USB PORT
Software House
I8, R8 or
I8-CSI
Module
Altronix
eFlow104NB
Altronix
VR6 & PDS8CB
Altronix
ACM8CB
RSB2 Bracket
Rocker Switch
Pem
Standoff
Power Supply or
Sub-Assembly
Backplane
Pan Head
Screw
Fig. 3a
Fig. 3