Spec Sheet

Description
Altronix T3MK77F16 kit consists of Trove3 enclosure and TM3 Mercury/Altronix
backplane with two 24VDC @ 10A power supply/chargers, two eight (8) fuse pro-
tected output access control modules and two eight (8) fuse protected output power
distribution modules. This kit also accommodates various combinations of Mercury/
Lenel* boards for up to sixteen (16) doors in a single enclosure. Trove simplifies
board layout and wire management, reduces installation time and labor costs.
T3MK77F16
Access & Power Integration Solution
Rev. T3MK77F16 - 10082019
*Altronix Power Supply/Chargers and Sub-Assemblies only
- Accommodates the following Mercury controllers:
EP1502, MR52, MR16IN, MR16OUT, EP2500, MUX8.
- Convenient knockout configuration:
- Single 2.415” diameter knockout located top of enclosure.
- Two (2) double knockouts (1.948” and 1.5”).
- Thirteen (13) double knockouts (1.115” and 1.362”)
- 16 AWG galvanized steel backplane simplifies board layout and
wire management.
- Filtered and electronically regulated outputs.
- Thermal and short circuit protection with auto reset.
- AC input and DC output LED indicators.
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- Built-in charger for sealed lead acid or gel type batteries.
- Instantaneous transfer to stand-by batteries.
- CE European Conformity.
- Enclosure accommodates up to four (4) 12VDC/12AH batteries.
- Lifetime Warranty*/Made in the U.S.A.
Key Features
Accessories (order separately)
LINQ2 - Network Supervision
Altronix LINQ2 Network Communication Module provides remote supervision, control and monitoring over LAN/WAN
- Remotely reports accurate power diagnostics
- Controls power and resets devices
- Reports system diagnostics via Email
WM5, WM25, WM100 - Magnetic Cable Tie Mounts
Altronix WM5, WM25, and WM100 are packs of 5, 25 or 100 magnetic cable tie mounts respectively.
They accommodate standard zip ties or velcro straps. These are ideal for wire management in our Trove series.
MM4, MM8, MM12, MM24 - Magnetic Mounting Solution
Altronix mounting magnets accommodate screws and nylon standoffs to allow for mounting various boards/
accessories in any metal enclosure or backplane.
WM5
LINQ2
Mounting Magnet
*Also compatible with these authentic Mercury partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls,
Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic Video
Insight, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
T3MK77F16