Spec Sheet

Description
Altronix Trove3 Mercury kits are pre-assembled and consist of Trove enclosure
and backplane with factory installed Altronix power supply/chargers and
sub-assemblies. These kits also accommodate various combinations of Mercury
boards for up to sixteen (16) doors in a single enclosure. Trove simplifies board
layout and wire management, reduces installation time and labor costs.
- Accommodate the following Mercury boards:
- Mercury: EP1502, MR52, MR16IN, MR16OUT, EP2500,
MUX8, and Genetec Synergis Cloud Link
- Convenient knockout configuration.
- 16 AWG galvanized steel backplane simplifies board layout
and wire management.
- Filtered and electronically regulated outputs.
- Thermal and short circuit protection with auto reset.
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- Built-in charger(s) for sealed lead acid or gel type batteries.
- Instantaneous transfer to stand-by batteries.
- AC input and DC output LED indicators.
- Enclosure accommodates up to four (4) 12VDC/12AH batteries.
- Lifetime Warranty* / Made in the U.S.A.
Trove3 / Mercury Kits
Access & Power Integration Solution
Rev. Trove3 / Mercury - 08232018
Key Features
Trove3 / Mercury Kit Components Reference Chart
Altronix
Model Number
Maximum
Number of Doors
Accommodated
Power Supplies
Access Power
Controllers
Power Distribution
Module Rocker Switch
Power Supply 1 Power Supply 2
T3MK75F16
16 eFlow104NB eFlow102NB Two (2) ACM8 PD8UL 2
T3MK75F16D
16 eFlow104NB eFlow102NB Two (2) ACM8CB PD8ULCB 2
T3MK77F16
16 eFlow104NB eFlow104NB Two (2) ACM8 Two (2) PD8UL 2
T3MK77F16D
16 eFlow104NB eFlow104NB Two (2) ACM8CB Two (2) PD8ULCB 2
T3MK75F16D
*Altronix Power Supply/Chargers and Sub-Assemblies only

Summary of content (2 pages)