Installation Guide

ManualsBrandsAltronix ManualsAutomation & Security16-Door Access and Power Integration Kit

T3KAK33F16

16 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove3 enclosure with TKA3 Altronix/Keyscan backplane

- (2) eFlow6NB - Power Supply/Chargers

- (2) ACM8 - Fused Access Power Controllers

- (1) PD4UL - Fused Power Distribution Board

- (1) T16175 Transformer (packed separately)

Rev. T3KAK33F16_112119

Installing Company: _________________________ Service Rep. Name: __________________________________________

Address: _________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

Installation Guide

All components of this Trove kit are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

Access & Power Integration

Summary of content (4 pages)

PAGE 1
Access & Power Integration T3KAK33F16 16 Door Kit with Fused Outputs Fully assembled kit includes: - Trove3 enclosure with TKA3 Altronix/Keyscan backplane - (2) eFlow6NB - Power Supply/Chargers - (2) ACM8 - Fused Access Power Controllers - (1) PD4UL - Fused Power Distribution Board - (1) T16175 Transformer (packed separately) Installation Guide All components of this Trove kit are UL Listed sub-assemblies. Please refer to the included corresponding Sub-Assembly Installation Guides for further information.
PAGE 2
Overview: Altronix T3KAK33F16 Trove Keyscan kit is pre-assembled and consist of Trove3KA3 enclosure/backplane with factory installed Altronix power supply/chargers, transformer, and sub-assemblies. This kit also accommodates various combinations of Keyscan boards for up to sixteen (16) doors in a single enclosure.
PAGE 3
T3KAK33F16: Configuration of Keyscan Boards 1. Mount appropriate Keyscan boards into the correct positions (Fig. 4, pg. 3) by postioning spacers over appropriate holes in the backplane and depressing down on board to secure spacer to the backplane (Fig. 4b, pg. 3). 2. Fasten backplane to Trove2 enclosure utilizing pan head screws (provided). OFF - 24V ON - 12V - DC + ON Fig.
PAGE 4
Enclosure Dimensions (H x W x D approximate): 36.12” x 30.125” x 7.06” (917.5mm x 768.1mm x 179.3mm) 2.00” (50.8mm) 7.12” (222.3mm) 9.5” (241.3mm) 1.25” (31.8mm) 1.78” (45.2mm) 1.07” (27.2mm) 1.55” (39.4mm) 30.12” (768.1mm) 14.01” (355.9mm) 14.01” (355.9mm) 2” (50.8mm) 10.75” (273.1mm) 1.10” (27.9mm) 10.75” (273.1mm) 2.00” (50.8mm) 1.25” (31.8mm) 9.5” (241.3mm) G 10.62” (269.8mm) 36.12” (917.5mm) 10.75” (273.1mm) 33.63” (854.2mm) 10.75” (273.1mm) 10.62” (269.8mm) G 1.25” (31.8mm) 7.