Spec Sheet

Power Supply 1 (eFlow104NB):
Input
Voltage 120VAC, 60Hz, 4.5A max.
Input Fuse 6.5A/250V.
Output
Voltage 24VDC.
Current 10A continuous.
Power Supply 2 (eFlow102NB):
Input
Voltage 120VAC, 60Hz, 3.5A max.
Input Fuse 5A/250V.
Output
Voltage 12VDC.
Current 10A continuous.
Both Power Supplies:
Outputs
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection. Filtered and regulated.
Battery Backup (not included)
Type Sealed lead acid or gel type.
Fuse Rating 10A/32VDC.
Failover Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised Latching or non-latching.
EOL 10K Resistor.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below 70-75% for
24V units or 71-73% for 12V units. Prevents deep battery discharge.
Indicators (LED)
AC Input 120VAC is present.
DC Output Powered.
Power Distribution Module (PD8UL):
Input
Voltage 24VDC from eFlow104NB.
Outputs
Voltage 24VDC.
Eight (8) fuse protected outputs. 3.5A per output max.
Output Fuses 3.5A/250V.
Indicators (LED)
Green LED DC Output.
Two (2) Access Power Controllers (ACM8):
Input
Voltage 24VDC from eFlow104NB.
Input Fuse 10A/250V.
Outputs
Voltage 24VDC.
Eight (8) independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
Form “C” Relays rated 28VAC or VDC @ 2.5A.
b) Auxiliary power outputs (unswitched).
c) Any combination of the above.
Output Fuses 3.5A/250V.
Indicators (LED)
Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.
T3HWK75F16 Kit:
Agency Listings
All components of this Trove kit are UL Listed sub-assemblies.
Please refer to the corresponding Sub-Assembly Installation Guides for
further information.
CE European Conformity.
Physical and Environmental
Dimensions (H x W x D)
36.12” x 30.12” x 7.06” (917.5 mm x 768.1 mm x 179.3 mm).
Weight (approx.)
Product 85 lb. (38.6 kg).
Shipping 92 lb. (41.73 kg).
Temperature
Operating 0ºC to 50ºC (32ºF to 122ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr (approx.): 177 BTU/Hr.
Specifications
T3HWK75F16
Access & Power Integration Solution