Manualshelf

Spec Sheet

ManualsBrandsAltronix ManualsAccess Control Power products14-Door S2 Access and Power Integration Kit - Trove2SS2 with eFlow104NB, eFlow102NB, (2) ACM8, (2) PD8UL
123
T2SSK75F14
Access & Power Integration Solution
Power Supply 1 (eFlow104NB):
Input
Voltage 120VAC, 60Hz, 4.5A max.
Input Fuse 6.3A/250V.
Output
Voltage 24VDC @ 10A.
Auxiliary 1A (unswitched).
Protection Overvoltage protection. Filtered and regulated.
Power Supply 2 (eFlow102NB):
Input
Voltage 120VAC, 60Hz, 3.5A max.
Input Fuse 5A/250V.
Output
Voltage 12VDC @ 10A.
Auxiliary 1A (unswitched).
Protection Overvoltage protection. Filtered and regulated.
Both Power Supplies:
Battery Backup
Type Sealed lead acid or gel type.
Fuse Rating 15A/32VDC.
Failover Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised Latching or non-latching.
EOL 10K Resistor.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
71-73% for 12V units and 70-75% for 24V units (depending on the
power supply). Prevents deep battery discharge.
Indicators (LED)
AC Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.
Two (2) Power Distribution Modules (PD8UL):
Input
Voltage 24VDC from eFlow104NB or
12VDC from eFlow102NB.
Outputs
Voltage 24VDC or 12VDC.
Output Fuses 3.5A/250V.
Indicators (LED)
Green LED DC Output.
Two (2) Access Power Controllers (ACM8):
Input
Voltage 24VDC from eFlow104NB or
12VDC from eFlow102NB.
Input Fuse 10A/250V.
Outputs
Voltage 24VDC or 12VDC.
Eight (8) 24VDC and eight (8) 12VDC independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
Form “C” Relays rated 28VAC or VDC @ 2.5A.
b) Auxiliary power outputs (unswitched).
c) Any combination of the above.
Output Fuses 3.5A/250V.
Indicators (LED)
Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.
T2SSK75F14 Kit:
Agency Listings
All components of this Trove kit are UL Listed sub-assemblies.
Please refer to the corresponding Sub-Assembly Installation Guides for
further information.
CE European Conformity.
Physical and Environmental
Dimensions (H x W x D)
27.25” x 21.5” x 6.5” (692.2mm x 546.1mm x 165.1mm).
Weight (approx.)
Product 49 lb. (22.23 kg).
Shipping 53.35 lb. (24.2 kg).
Temperature
Operating 0ºC to 50ºC (32ºF to 122ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr (approx.): 191 BTU/Hr.
Specifications