Installation Guide

ManualsBrandsAltronix ManualsAutomation & Security12-Door Access and Power Integration Kit Includes Trove2SA2 with eFlow104NB, eFlow102NB, ACM8, ACM4, PDS8

Access & Power Integration

T1SAK3F4

4 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove1 enclosure with TSA1 Altronix/Salto backplane

- (1) eFlow6NB - Power Supply/Charger

- (1) ACM4 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

T2SAK7F8

8 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove2 enclosure with TSA2 Altronix/Salto backplane

- (1) eFlow104NB - Power Supply/Charger

- (1) ACM8 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

T2SAK75F12

12 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove2 enclosure with TSA2 Altronix/Salto backplane

- (1) eFlow104NB - Power Supply/Charger

- (1) eFlow102NB - Power Supply/Charger

- (1) ACM8 - Fused Access Power Controller

- (1) ACM4 - Fused Access Power Controller

- (1) PDS8 - Dual Input Power Distribution Module

Rev. TSAK032919

Installing Company: _____________________ Service Rep. Name: __________________________________________

Address: ________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

Installation Guide

All components of these Trove kits are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

Summary of content (8 pages)

PAGE 1
Access & Power Integration T1SAK3F4 T2SAK75F12 Fully assembled kit includes: Fully assembled kit includes: 4 Door Kit with Fused Outputs - Trove1 enclosure with TSA1 Altronix/Salto backplane (1) eFlow6NB - Power Supply/Charger (1) ACM4 - Fused Access Power Controller (1) VR6 - Voltage Regulator (1) PDS8 - Dual Input Power Distribution Module 12 Door Kit with Fused Outputs - Trove2 enclosure with TSA2 Altronix/Salto backplane (1) eFlow104NB - Power Supply/Charger (1) eFlow102NB - Power Supply/Charger
PAGE 2
Overview: Altronix Trove Salto kits are pre-assembled and consist of Trove1SA1 or Trove2SA2 enclosure/backplane with factory installed Altronix power supply/charger(s) and sub-assemblies. These kits also accommodate various combinations of Salto modules for up to twelve (12) doors in a single enclosure. 8 2.5 24VDC @ 9.2A 8 2.5 12VDC @ 9.3A 24VDC @ 9.2A 12 2.5 10A/ 250V 10A/ 250V 10A/ 250V 3A/ 250V 2.5A/ 250V 2.
PAGE 3
T1SAK3F4: Configuration of Salto Modules: 1. Fasten spacers onto metal pems configuration (A) of backplane (Fig. 2, pg. 3). 2. Position Salto modules over corresponding spacers and mount them utilizing pan head screws (provided) (Fig. 2a, pg. 3). 3. Mount backplane to enclosure with hardware. Access Controller Position Chart for the Following Models: Salto Access Controller CU42E0, CU4200 or CU4EB8 Pem Mounting A Fig.
PAGE 4
T2SAK7F8: Configuration of Salto Modules: 1. Fasten spacers onto metal pems configuration (A) of backplane (Fig. 3, pg. 4). 2. Position Salto modules over corresponding spacers and mount them utilizing pan head screws (provided) (Fig. 3a, pg. 4). 3. Mount backplane to enclosure with hardware. Access Controller Position Chart for the Following Models: Salto Access Controller CU42E0, CU4200 or CU4EB8 Pem Mounting A --- DC + Fig.
PAGE 5
T2SAK75F12: Configuration of Salto Modules: 1. Fasten spacers onto metal pems configuration (A) of backplane (Fig. 4, pg. 5). 2. Position Salto modules over corresponding spacers and mount them utilizing pan head screws (provided) (Fig. 4a, pg. 5). 3. Mount backplane to enclosure with hardware. Access Controller Position Chart for the Following Models: Salto Access Controller CU42E0, CU4200 or CU4EB8 Pem Mounting A Fig. 4 Fig.
PAGE 6
eFlow Power Supply/Chargers can be Controlled and Monitored while Reporting Power/Diagnostics from Anywhere over the Network... LINQ2 - Network Communication Module LINQ2 provides remote IP access to real-time data from eFlow power supply/chargers to help keep systems up and running at optimal levels.
PAGE 7
T1SAK3F4 Enclosure Dimensions (H x W x D): 18” x 14.5” x 4.625” (457mm x 368mm x 118mm) 14.5” (321.3mm) 7.25” (184.2mm) 1.45” (36.8mm) 1.95” (49.5mm) 4.5” (114.3mm) 13.0” (330.2mm) 1.25” (31.8mm) 1.5” (38.1mm) 1.25” (31.8mm) 1.5” (38.1mm) 0.6” (15.2mm) 8.5” (215.9mm) 6.5” (165.1mm) 6.5” (165.1mm) 18.0” (457.2mm) 8.5” (215.9mm) 0.57” (14.5mm) 0.6” (15.2mm) 1.1” (27.9mm) 4.5” (114.3mm) 4.5” (114.3mm) 2.75” (69.9mm) 1.115” (28.3mm) 1.36” (34.5mm) - 7 - 1.25” (31.
PAGE 8
T2SAK7F8 and T2SAK75F12 Enclosure Dimensions (H x W x D): 27.25” x 21.75” x 6.5” (692.15mm x 552.5mm x 165.1mm) 21.50” (546.1mm) 5.25” (133.35mm) 3.5”(88.9mm) 3.5”(88.9mm) 5.25” (133.35mm) 0.685” (17.4mm) 1.25” (31.8mm) 6.25” (158.8mm) 1.25” (31.8mm) 0.5625” (14.3mm) 1.77” (45mm) 2.415” (61.3mm) 1.5” (38.1mm) Knockouts 1.125” (28.3mm) 0.885” (22.5mm) 2.00” (50.8mm) 6.25” (158.8mm) 2.00” (50.8mm) 19.80” (502.9mm) 8.00” (203.2mm) 27” (685.8mm) 8.25” (209.5mm) 6.75” (171.5mm) 2.00” (50.