Spec Sheet

Power Supply 1 (AL1024ULXB2):
Input
Voltage 115VAC 60Hz, 4.2A max
Fusing 5A / 250V
Output
Voltage 24VDC
Current 10A @ 24VDC continuous max
Other Overvoltage protection
Filtered and regulated
Power Supply 2 (AL1012ULXB):
Input
Voltage 115VAC, 60Hz, 2.6A max
Fusing 5A / 250V
Output
Voltage 12VDC
Current 10A @ 12VDC continuous max
Other Overvoltage protection
Filtered and regulated
Both Power Supplies:
Back-up Battery
Capacity 7AH /12VDC (4 within enclosure)
40 AH / 65 AH (requires separate enclosure)
Type Sealed lead acid or gel type
Failover Upon AC loss, instantaneous
Supervision
AC Failure Form “C” contacts
Battery Form “C” contacts
Indicators (LED)
Input 115VAC is present
DC Output Powered
Battery Discharged or not connected
Dual Input Power Distribution Module (PDS8):
Input
Voltage 24VDC from AL1024ULXB2 and
12VDC from AL1012ULXB
Input Fuse 10A/32V.
Outputs
Voltage 12 or 24VDC individually selectable
Output Fuses 3A/32VDC
Indicators (LED)
DC Output Eight (8) individual output LEDs
Green: 12VDC
Red: 24VDC
Access Power Controller (ACM8):
Input
Voltage 24VDC from AL1024ULXB2
Input Fuse 10A/250V
Outputs
Voltage 24VDC
Eight (8) independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs
Form “C” Relays rated 28VAC or VDC @ 2.5A
b) Auxiliary power outputs (unswitched)
c) Any combination of the above
Output Fuses 3.5A/250V
Indicators (LED)
Red LEDs Outputs are triggered (relays energized)
Green LED FACP disconnect is triggered
Access Power Controller (ACM4):
Input
Voltage 24VDC from AL1024ULXB2
Input Fuse 10A/32V
Outputs
Voltage 24VDC
Four (4) independently controlled 2.5A outputs:
a) Four (4) Fail-Safe and/or Fail-Secure power outputs
b) Four (4) dry form “C” 5A rated relay outputs.
c) Any combination of the above
Four (4) auxiliary power outputs (unswitched)
Output Fuses 3A/32V
Indicators (LED)
Red LEDs Outputs are triggered (relays energized)
Green LED FACP disconnect is triggered
T2SAK7512 Kit:
Agency Listings
All components of this Trove kit are UL Listed sub-assemblies
Please refer to the corresponding Sub-Assembly Installation Guides for
further information
CE European Conformity
Physical and Environmental
Dimensions (H x W x D)
27.25” x 21.5” x 6.5” (692.2mm x 546.1mm x 165.1mm)
Weight (approx.)
Product 55.4 lbs. (25.1 kg)
Shipping 60.4 lbs. (27.4 kg)
Temperature
Operating 0ºC to 50ºC (32ºF to 122ºF)
Storage -20ºC to 70ºC (-4ºF to 158ºF)
Relative Humidity 85% +/-5%
BTU/Hr (approx.): 177 BTU/Hr
Specifications
T2SAK7512
Access & Power Integration Solution