Spec Sheet
eFlow104NBV Power Supply:
Input
Voltage 220VAC (working range 198VAC - 256VAC),
50/60Hz, 2.7A max.
Input Fuse 5A / 250V.
Output
Voltage 24VDC @ 10A.
Auxiliary 1A (unswitched).
Protection Overvoltage protection.
Filtered and regulated.
Battery Backup
Type Sealed lead acid or gel type.
Fuse Rating 10A / 32VDC.
Failover Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised Latching or non-latching.
EOL 10K Resistor.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
71-73% for 12V units. Prevents deep battery discharge.
Indicators (LED)
AC Input 220VAC is present.
DC Output Powered.
Battery Discharged or not connected.
ACM8 Access Power Controller:
Input
Voltage 12VDC from eFlow102NBV.
Main Fuse 10A / 32V.
Outputs
Voltage 12VDC.
Eight (8) 24VDC independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
Form “C” Relays rated 28VAC or VDC @ 2.5A.
b) Auxiliary power outputs (unswitched).
c) Any combination of the above.
Output Fuses 3.5A / 32VDC.
Indicators (LED)
Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.
VR6 Voltage Regulator:
Input/Output
Voltage Range 24VDC @ 3.5A = Output: 12VDC @ 6A.
Output
12VDC regulated output.
Output rating 6A max.
Surge suppression.
Indicators (LED)
Input Indicates input voltage is present.
Output Indicates normal operating condition.
PDS8 Dual Output Power Distribution Module:
Input
Voltage Range
5VDC to 24VDC, up to 10A each, 20A total input.
Main Fuse Rating 10A.
Outputs
Fuse protected outputs rated @ 3A per output,
non power-limited. Total output 20A max.
Do not exceed the individual power supply ratings.
Any of the eight (8) fuse protected power outputs are selectable
to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Outputs Ratings:
4.8VDC - 24VDC.
Indicators (LED)
DC Output Individual voltage LEDs indicate
12VDC (Green) or 24VDC (Red/Green).
Features
Multiple units may be daisy-chained to accommodate larger systems.
T2PXK7F8V Kit:
Agency Listings
CE European Conformity.
Physical and Environmental
Dimensions (H x W x D)
27.25” x 21.5” x 6.5” (692.2mm x 546.1mm x 165.1mm).
Weight (approx.)
Product 51.5 lbs. (23.36 kg).
Shipping 54.5 lbs. (24.72 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr (approx.): 113 BTU/Hr.
Specifications
T2PXK7F8V
Access & Power Integration Solution