Installation Guide

ManualsBrandsAltronix ManualsAutomation & Security8-Door Access and Power Integration Kit Includes Trove2KS2 with eFlow6NB, ACMS8, VR6, PDS8

Trove Keri Systems Kits - 3 -

T2KSK3F8: Installation Instructions for Keri Systems Access Controllers

1. Fasten spacers (provided) into pem configuration (A) or (B) of backplane (Fig. 2, pg. 3).

2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 2a, pg. 3).

Note: Keri Systems NXT-2D-MSCNE and NXT-4D-MSCNE boards have one (1) RJ45 jack each.

Please make sure that they are mounted correctly, as shown in Fig. 2 below.

3. Mount backplane to enclosure with hardware.

If use of NXTWI or NXTRM3 expansion boards is desired, there is no need to remove NXT-2D-MSCNE, NXT-4D-MSCNE or

NXT-4X4NE from the TKS2.

Keri Systems Access Controller Position Chart for the Following Models:

Keri Systems Board Pem Mounting

NXT-2D-MSCNE, NXT-4D-MSCNE A

NXT-4X4NE B

Pem

Spacer

Keri Systems

Board

Backplane

Pan Head

Screw

Fig. 2a

NC C NO NC

C NO

AC FAIL BAT FAIL

TRIGGER

AC DCAC1

EOLNOGND

SUPERVISED RESET

+AUX-

- BAT +- DC +

L G N

OFF - 24V

ON - 12V

Altronix

eFlow6NB

Altronix ACMS8

PWR1

PWR2

COM -

PWR2

PWR1

+ PWR2

+ PWR1

+ INP1

DM1 +

OFF

IN1

IN2

Out1

1 off 2

DM1 +

DM2 +

Common (--- )

+ INP2

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

3333 33

Out2

1 off 2

Out3

1 off 2

Out4

1 off 2

Out5

1 off 2

Out6

1 off 2

Out7

1 off 2

Out8

1 off 2

Altronix PDS8

Altronix VR6 mounted under PDS8

RJ45 Jack

Fig. 2