Spec Sheet

Description
Altronix Trove Keyscan kits are pre-assembled and consist of Trove2KA2 enclosure/
backplane with factory installed Altronix power supply/charger, transformer, and
sub-assemblies. These kits also accommodate various combinations of Keyscan
boards for up to eight (8) doors in a single enclosure. Trove simplifies board layout
and wire management, reduces installation time and labor costs.
- Accommodates the following Keyscan controllers:
either CA250B, CA4500B or CA8500B,
up to two (2) OCB8, and one (1) of each DPS15 and CIM.
- Convenient knockout configuration:
- Single 2” diameter knockout located top center of enclosure
- Sixteen (16) double knockouts (1” and 0.75”).
- 16 AWG galvanized steel backplane simplifies board layout and
wire management.
- Filtered and electronically regulated outputs.
- Thermal and short circuit protection with auto reset.
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- Built-in charger(s) for sealed lead acid or gel type batteries.
- Instantaneous transfer to stand-by batteries.
- AC input and DC output LED indicators.
- Enclosure accommodates up to four (4) 12VDC/12AH batteries.
- Lifetime Warranty* / Made in the U.S.A.
Trove / Keyscan Kits
Access & Power Integration Solution
Rev. TroveK Kits - 12202017
Key Features
T2KK3F8Q
Altronix
Model Number
Maximum Number of
Doors Accommodated
Power Supply
Network Communications
Module
Access Power
Controllers
Transformer
T2KK3F8
8 eFlow6NB
----
ACM8
T16100
T2KK3F8Q
LINQ2
T2KK3F8D
----
ACM8CB
T2KK3F8DQ
LINQ2
Trove Keyscan Kit Components Reference Chart
*Altronix Power Supply/Chargers and Sub-Assemblies only