Spec Sheet

Description
Altronix T2AMK7F8 kit consists of Trove2 enclosure, TAM2 AMAG/Altronix
backplane with one (1) 24VDC @ 10A power supply/charger, one (1) fused
access power controller, one (1) voltage regulator and one (1) dual input fused
power distribution module.
This kit also accommodates various combinations of AMAG modules for up to
eight (8) doors in a single enclosure. Trove simplifies board layout and wire
management, reduces installation time and labor costs.
T2AMK7F8
Access & Power Integration Solution
Rev. T2AMK7F8 - 03122020
- 24VDC power supply/charger.
- Accommodates a combination of the following AMAG modules:
M2150 2DC, M2150 4DC, M2150 AC24/4, M2150 2DBC,
M2150 4DBC, or M2150 8DBC.
- Convenient knockout configuration:
- Single 2” diameter knockout located top center of enclosure
- Sixteen (16) double knockouts (1” and 0.75”).
- 16 AWG galvanized steel backplane simplifies board layout
and wire management.
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- CE European Conformity.
- Enclosure accommodates up to four (4) 12VDC/12AH batteries.
- Lifetime Warranty*/Made in the U.S.A.
Key Features
*Altronix Power Supply/Chargers and Sub-Assemblies only
T2AMK7F8
Accessories (order separately)
LINQ2 - Network Supervision
Altronix LINQ2 Network Communication Module provides remote supervision, control and monitoring over LAN/WAN
- Remotely reports accurate power diagnostics
- Controls power and resets devices
- Reports system diagnostics via Email
WM5, WM25, WM100 - Magnetic Cable Tie Mounts
Altronix WM5, WM25, and WM100 are packs of 5, 25 or 100 magnetic cable tie mounts respectively.
They accommodate standard zip ties or velcro straps. These are ideal for wire management in our Trove series.
MM4, MM8, MM12, MM24 - Magnetic Mounting Solution
Altronix mounting magnets accommodate screws and nylon standoffs to allow for mounting various boards/
accessories in any metal enclosure or backplane.
WM5
LINQ2
Mounting Magnet