Spec Sheet

T1RV3F4
Trove / HID VertX
®
Kit
Access & Power Integration Solution
Rev. T1RV3F4 - 07282020
- Output Power:
- Four (4) 24VDC fused lock power outputs rated at 6A total max.
- Fire Alarm Disconnect is individually selectable by output.
- Eight (8) individully selectable 12VDC or 24VDC fused power
outputs rated at 6A total max. for readers, REXs, controllers, etc.
- Accommodates the following HID VertX
®
controllers:
V100, V200, V300, V1000, V2000.
- Power status LED on front panel.
- Simplified board layout and wire management.
- Convenient knockout configuration:
- Six (6) 1.25” diameter knockouts located on the back
of enclosure.
- 6’ IEC320 3-wire power cord.
- 2U drawer on extendable rails.
- Included Z Bracket facilitates ease of wiring.
- Black powder coated steel enclosure.
- Includes cam lock, tamper switch and mounting hardware.
- CE European Conformity.
- Lifetime Warranty* / Made in the U.S.A.
Key Features
*Altronix Power Supply/Charger and Sub-Assemblies only
Optional Accessories
- RE2:
Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries.
- WM5, WM25, WM100:
Magnetic Cable Tie Mounts (5, 25, 100 counts).
T1RV3F4
Description
Altronix T1RV3F4 Trove™ Rack kit is pre-assembled and consists of
Trove1V1R enclosure/backplane with the following factory installed
Altronix components:
- One (1) eFlow6NB - power supply/charger set at 24VDC;
- One (1) VR6 - Voltage Regulator;
- One (1) PDS8 - Fused Dual Output Power Distribution Module;
- One (1) ACM4 - Fused Access Power Controller.
This kit also accommodates various combinations of HID VertX
®
boards
for up to four (4) doors in a single enclosure.