Spec Sheet

Power Supply/Charger (eFlow6NBV):
Input
Voltage 220VAC (working range 198VAC - 256VAC),
50/60Hz, 2.5A.
Input Fuse 5A / 250V.
Outputs
Voltage Factory set at 24VDC.
Current 6A continuous.
Maximum Supply Current for Main and Aux. Outputs on
eFlow6NBV Power Supply board, PDS8 Power Distribution Module’s
and ACM4 Access Power Controller’s outputs is 5.6A.
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.
Filtered and regulated.
Battery Backup
Type Sealed lead acid or gel type.
Fuse Rating 10A @ 32VDC.
Failover Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised Latching or non-latching.
EOL 10K Resistor.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units. Prevents deep battery discharge.
Indicators (LED)
Input 220VAC is present.
DC Output Powered.
Battery Discharged or not connected.
Power Distribution Module (PDS8):
Input
Voltage 24VDC from eFlow6NBV and 12VDC from VR6.
Input Fuse 10A / 250V.
Outputs
Voltage 12 or 24VDC individually selectable.
Output Fuses 3A / 32VDC.
Indicators (LED)
DC Output Eight (8) individual output LEDs.
Green: 12VDC
Red: 24VDC.
Voltage Regulator (VR6):
Input
Voltage 24VDC from eFlow6NBV.
Outputs
Voltage 12 or 24VDC individually selectable.
Output Fuses 3A / 32VDC.
Indicators (LED)
DC Output Eight (8) individual output LEDs.
Green: 12VDC
Red: 24VDC.
Access Power Controller (ACM4):
Input
Voltage 24VDC from eFlow6NBV.
Main Fuse 10A / 250V.
Outputs
Voltage 24VDC.
Four (4) independently controlled 2.5A outputs:
a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
b) Four (4) dry form “C” 5A rated relay outputs.
c) Any combination of the above.
Four (4) auxiliary power outputs (unswitched).
Output Fuses 3A / 32VDC.
Indicators (LED)
Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.
T1RM3F4V Kit:
Agency Listings
CE European Conformity.
Physical and Environmental:
Dimensions (H x W x D):
Modular 2U standard EIA 19” rack mount chassis.
3.25” x 19.0” x 26.5” (82.6mm x 482.6mm x 673.1mm).
Weights:
Product 20 lbs. (9.07 kg).
Shipping 25 lbs. (11.34 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr.: 115 BTU/Hr.
Specifications
T1RM3F4V
Rack Access and Power Integration Solution for Mercury