Spec Sheet

T1RAL13F8P8
Trove / Altronix Kit
Access & Power Integration Solution
Power Supply/Charger (eFlow6NB):
Input
Voltage 120VAC, 60Hz, 3.5A max.
Main Fuse 5A / 250V.
Outputs
Voltage set for 24VDC.
Current 6A continuous.
Maximum Supply Current for Main and Aux. Outputs on
eFlow6NB Power Supply board, ACM8 Access Power Controller
outputs is 5.6A.
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.
Filtered and regulated.
Power Supply/Charger (eFlow4NB):
Input
Voltage 120VAC, 60Hz, 3.5A max.
Main Fuse 5A / 250V.
Outputs
Voltage set for 12VDC.
Current 4A continuous.
Maximum Supply Current for Main and Aux. Outputs on
eFlow6NB Power Supply board, ACM8 Access Power Controller
outputs is 5.6A.
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.
Filtered and regulated.
Both Power Supplies:
Battery Backup
Type Sealed lead acid or gel type.
Fuse Rating 10A @ 32VDC.
Failover Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised Latching or non-latching.
EOL 10K Resistor.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units. Prevents deep battery discharge.
Indicators (LED)
Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.
Access Power Controller (ACM8):
Input
Voltage 24VDC from eFlow6NB.
Input Fuse 10A/32V.
Outputs
Voltage 24VDC.
Eight (8) independently controlled 2.5A outputs:
a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
b) Eight (8) dry form “C” 5A rated relay outputs.
c) Any combination of the above.
Eight (8) auxiliary power outputs (unswitched).
Outputs Ratings
Fuses 3A/32VDC.
Indicators (LED)
Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.
Power Distribution Module (PD8UL):
Input
Voltage 12VDC from eFlow4NB.
Outputs
Class 2 power-limited auto-resettable outputs.
Voltage 12VDC.
PTCs 2.5A.
Indicators (LED)
Green LED DC Output.
T1RAL13F8P8 Kit:
Agency Listings
CE European Conformity.
Physical and Environmental:
Dimensions (H x W x D):
Modular 2U standard EIA 19” rack mount chassis.
3.25” x 19.0” x 26.5” (82.6mm x 482.6mm x 673.1mm).
Weights:
Product 20 lbs. (9.07 kg).
Shipping 25 lbs. (11.34 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr.: 115 BTU/Hr.
Specifications