Installation Guide

- 2 - T1RAG3F8
Overview:
Altronix T1RAG3F8 Trove rack kit is pre-assembled and consist of Trove rack enclosure/backplane with factory installed Altronix power
supply/charger and sub-assemblies. Kits accommodate up to two (2) AMAG M4000 modules for up to eight (8) doors in a single enclosure.
Configuration Chart:
Altronix
Model
Number
120VAC
60Hz
Input
Current
Power
Supply
Board
Input
Fuse
Rating
Power
Supply
Board
Battery
Fuse
Rating
Nominal DC
Output Voltage
Maximum Supply
Current for Main and
Aux. Outputs on Power
Supply board and
ACMS8 Access Power
Controller’s outputs
Fail-Safe/
Fail-Secure
or Dry
Form “C”
Outputs
ACMS8
Board
Input
Fuse
Rating
ACMS8
Board
Output
Fuse
Rating
[DC] [Aux]
Output
Range
(VDC)
Output
Range
(VDC)
T1RAG3F8
3.5A 5A/250V
15A/
32V
20.17-
26.4
20.28-
26.4
24VDC @ 5.4A 8
15A/
32V
3A/
32V
Hardware and Accessories:
Specifications:
Agency Listings:
CE European Conformity.
Mechanical:
Black enclosure with ample knockouts for convenient access.
Includes: tamper switch, cam lock and mounting hardware.
Modular 2U standard EIA 19” drawer with
extendable slides up to 48”.
Dimensions (H x W x D): 3.25” x 19.0” x 26.5”
(82.6mm x 482.6mm x 673.1mm).
Included Accessories:
One (1) tamper switch (Altronix Model TS112 or equivalent).
Cam lock.
Available Accessories (not included):
RE2: Rack Mount Battery Enclosure
accommodates up to four (4) 12VDC/7AH batteries.
WM5, WM25, WM100: Magnetic Cable Tie Mounts
(5, 25, 100 counts).
Spacer | 5/16” Pan Head Screw | Lock Nut