Installation Guide

ManualsBrandsAltronix ManualsAutomation & Security24 Door Altronix/PDK Access and Power Integration Kit

T1PDK7F24

24 Door Kit

Fully assembled kit includes:

- Trove1 enclosure with TPD1 Altronix/PDK backplane

- One (1) eFlow104NB - Power Supply/Charger

Access & Power Integration

Rev. 040419

Installing Company: _____________________ Service Rep. Name: __________________________________________

Address: ________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

Installation Guide

All components of this Trove kit are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

Summary of content (4 pages)

PAGE 1
Access & Power Integration T1PDK7F24 24 Door Kit Fully assembled kit includes: - Trove1 enclosure with TPD1 Altronix/PDK backplane - One (1) eFlow104NB - Power Supply/Charger All components of this Trove kit are UL Listed sub-assemblies. Please refer to the included corresponding Sub-Assembly Installation Guides for further information. Installation Guide All registered trademarks are property of their respective owners. More than just power.™ Rev.
PAGE 2
Overview: Altronix T1PDK7F24 Trove PDK kit is pre-assembled and consists of Trove1PD1 enclosure/backplane with factory installed Altronix power supply/charger. T1PDK7F24 kit also accommodates up to three (3) PDK 8DEE modules for up to twenty-four (24) doors in a single enclosure. Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only. 1.
PAGE 3
Configuration of PDK 8DEE Modules: 1. Fasten spacers (provided) to pems that match the hole pattern for PDK 8DEE modules (Fig. 2, pg. 3). 2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 2, 2a, pg. 3). Note: PDK 8DEE modules have one (1) RJ45 jack each. Please make sure that they are mounted correctly, as shown in Fig. 2 below. 4. Fasten TPD1 backplane to Trove1 enclosure utilizing hardware (provided). Fig.
PAGE 4
Trove1 Enclosure Dimensions (H x W x D approximate): 18” x 14.5” x 4.625” (457mm x 368mm x 118mm) 14.5” (321.3mm) 7.25” (184.2mm) 1.45” (36.8mm) 1.95” (49.5mm) 4.5” (114.3mm) 13.0” (330.2mm) 1.25” (31.8mm) 1.5” (38.1mm) 1.25” (31.8mm) 1.5” (38.1mm) 0.6” (15.2mm) 8.5” (215.9mm) 6.5” (165.1mm) 6.5” (165.1mm) 18.0” (457.2mm) 8.5” (215.9mm) 0.57” (14.5mm) 0.6” (15.2mm) 1.1” (27.9mm) 4.5” (114.3mm) 4.5” (114.3mm) 2.75” (69.9mm) 1.115” (28.3mm) 1.36” (34.5mm) 1.25” (31.