Spec Sheet

Description
Altronix T1MK1F4SD kit consists of Trove1 enclosure and TM1 Mercury/Altronix
backplane with 12VDC or 24VDC (factory set at 24VDC) @ 4A power supply/charger,
12VDC voltage regulator, eight (8) PTC protected output dual voltage power distribu-
tion module and four (4) PTC protected output access control module. This kit also
accommodate various combinations of Mercury/Lenel* boards for up to four (4) doors
in a single enclosure. Trove simplifies board layout and wire management, reduces
installation time and labor costs.
T1MK1F4SD
Access & Power Integration Solution
Rev. T1MK1F4SD - 04132020
*Altronix Power Supply/Chargers and Sub-Assemblies only
- Accommodates the following Mercury controllers:
EP1502, LP1502, MR52, MR16IN, MR16OUT, EP1501,
LP1501, MR51e, MR62e, MR50, EP2500, LP2500, MUX8.
- Convenient knockout configuration:
- Single 1.5” diameter knockout located top center of enclosure
- Nine (9) double knockouts (1” and 0.75”).
- 16 AWG galvanized steel backplane simplifies board layout and
wire management.
- Filtered and electronically regulated outputs.
- Thermal and short circuit protection with auto reset.
- AC input and DC output LED indicators.
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- Built-in charger for sealed lead acid or gel type batteries.
- Instantaneous transfer to stand-by batteries.
- CE European Conformity.
- Enclosure accommodates up to two (2) 12VDC/7AH batteries.
- Lifetime Warranty* / Made in the U.S.A.
Key Features
T1MK1F4SD
Accessories (order separately)
LINQ2 - Network Supervision
Altronix LINQ2 Network Communication Module provides remote supervision, control and monitoring over LAN/WAN
- Remotely reports accurate power diagnostics
- Controls power and resets devices
- Reports system diagnostics via Email
WM5, WM25, WM100 - Magnetic Cable Tie Mounts
Altronix WM5, WM25, and WM100 are packs of 5, 25 or 100 magnetic cable tie mounts respectively.
They accommodate standard zip ties or velcro straps. These are ideal for wire management in our Trove series.
MM4, MM8, MM12, MM24 - Magnetic Mounting Solution
Altronix mounting magnets accommodate screws and nylon standoffs to allow for mounting various boards/
accessories in any metal enclosure or backplane.
WM5
LINQ2
Mounting Magnet
*Also compatible with these authentic Mercury partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls,
Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic Video
Insight, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt