Spec Sheet

Power Supply (eFlow4NB):
Input
Voltage 120VAC, 60Hz.
Fuse Rating 5A/250V.
Output
Voltage 24VDC.
Current 4A continuous.
Other Overvoltage protection. Filtered and regulated.
Battery Backup
Capacity 7AH / 12VDC (Up to 2 within enclosure).
40 AH / 65 AH (requires separate enclosure).
Type Sealed lead acid or gel type.
Fuse Rating 7.5A/32V.
Failover Upon AC loss, instantaneous.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units (depending on the power supply).
Prevents deep battery discharge.
Indicators (LED)
Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.
Dual Input Power Distribution Module (PDS8)
Input
Voltage 12VDC from VR6 and 24VDC from eFlow4NB.
Input Fuse 10A/32V.
Outputs
Voltage 12VDC and/or 24VDC.
Any of the eight (8) power outputs are selectable
to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Outputs Ratings
Fuses 3A/32V.
Indicators (LED)
DC Output Eight (8) individual output LEDs.
Green: 12VDC
Red: 24VDC.
Voltage Regulator (VR6):
Input
Voltage 24VDC from eFlow4NB.
Output
Voltage 12VDC.
Current 6A continuous.
Other Surge suppression.
Indicators (LED)
Input 24VDC is present.
Output Powered.
Access Power Controller (ACM4):
Input
Voltage 24VDC from eFlow4NB.
Input Fuse 10A/32V.
Outputs
Voltage 24VDC.
Four (4) independently controlled 2.5A outputs:
a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
b) Four (4) dry form “C” 5A rated relay outputs.
c) Any combination of the above.
Four (4) auxiliary power outputs (unswitched).
Outputs Ratings
Fuses 3A/32VDC.
Indicators (LED)
Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.
T1MK1F4S Kit:
Agency Listings
All components of this Trove kit are UL Listed sub-assemblies.
Please refer to the corresponding Sub-Assembly Installation Guides for
further information.
CE European Conformity.
Physical and Environmental:
Dimensions (H x W x D)
18” x 14.5” x 4.62” (457.2mm x 368.3mm x 118.0mm).
Weight (approx.)
Product 16.23 lbs. (7.36 kg)
Shipping 20.23 lbs. (9.07 kg)
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr. (approx.): 90 BTU/Hr.
Specifications
T1MK1F4S
Access & Power Integration Solution