Panic Device Power Controller Installation Guide Altronix Corp. 140 58th St. Brooklyn, NY Rev. 050608 More than just power.
Table of Contents: Overview............................................................................................................................ 3 Specifications..................................................................................................................... 3 Installation Instructions..................................................................................................... 3 LED Diagnostics................................................................................
Overview: StrikeIt2 operates one (1) 24VDC panic hardware device. It is designed to handle the high current surge panic hardware locking devices demand. In addition, an auxiliary power output provides power for accessory devices such as card readers, keypads, REX PIRs, electronic timers, relays, etc. Agency Approval: Specifications: Battery Backup: • UL Listed for Access Control System Units (UL 294). • CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
LED Diagnostics: LED AC Power Green Red LED Status On Off On Off Panic Device Power Controller Status Normal operating condition. Loss of AC. 24VDC present on the output (unit is triggered). Loss of 24VDC on the output (unit is not triggered). Maintenance: Unit should be tested at least once a year for the proper operation as follows: Output Voltage Test: Under normal load conditions the DC output voltage should be checked for proper voltage level.
Typical Application Diagram: Fig. 1 6.
CAUTION: De-energize unit prior to servicing. For continue protection against risk of electric shock and fire hazard repla main fuse with the same type and rating 6.3A/250V. Do not expose to rain or moisture. Fig. 2 CAUTION: De-energize unit prior to servicing. For continued protection against risk of electric shock and fire hazard replace main fuse with the same type and rating 6.3A/250V. Do not expose to rain or moisture.
Enclosure Dimensions (H x W x D approximate): 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm) 7.25” (184.15mm) 3.625” (184.15mm) 1.25” (31.75mm) 3.5” (88.9mm) 1.25” (31.75mm) 2” (50.8mm) 0.6” (15.24mm) 0.6” (15.24mm) 6.05” (153.67mm) 1.125” (28.575mm) 1.125” (28.575mm) 2” (50.8mm) 8.125” (206.375mm) 1” (25.4mm) 1” (25.4mm) 6.05” (153.67mm) 0.6” (15.24mm) 0.6” (15.24mm) 1.25” (31.75mm) 3.5” (88.9mm) 1” (25.4mm) 1” (25.4mm) StrikeIt2 5.25” (133.35mm) 1” (25.
Notes: Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 website: www.altronix.com, e-mail: info@altronix.com, Made in U.S.A.
