Brochure

StrikeIt2
Panic Device Power Controller
Rev. DSStrikeIt2_08182014
StrikeIt2 operates one (1) 24VDC panic hardware device. It is designed to han-
dle the high current surge panic hardware locking devices demand. In addition,
an auxiliary power output provides power for accessory devices such as card
readers, keypads, REX PIRs, electronic timers, relays, etc.
Overview
Specifications
StrikeIt2
Agency Approvals
UL Listed for Commercial CCTV Equipment
(UL 2044).
CUL Listed - CSA Standard C22.2
No.1-98, Audio, Video and Similar
Equipment.
CSFM - California State
Fire Marshal Approved.
Input:
• 115VAC60Hz,7amp.
• One(1)N/Otriggerinput.
Output:
• One(1)23.2-24VDClockoutputratedupto16amp
 for300ms,0.5ampcontinuousholdcurrent.*
• One(1)23.2-24VDCfilteredregulatedauxiliary
 outputrated@0.5ampcontinuoussupplycurrent*
* Note: Total combined current for the outputs
may not exceed 1 amp.
Battery Backup:
• Batteryleadsincluded.
• Built-inchargerforsealedleadacidor
gel type batteries.
• Automaticswitchovertostand-bybattery
when AC fails.
• Maximumchargecurrent0.3amp.
Battery Backup (cont’d):
• When4AHbatteriesareused,batterycapacity
 foremergencystand-byisatleasta1/2hour.
Visual Indicators:
• GreenACPowerLEDindicates115VACpresent.
• RedLEDindicatespresenceof24VDC.
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• BTU/Hr.:151BTU/Hr.
• SystemACinputVArequirement:805VA.
Mechanical:
• EnclosureDimensions(HxWxDapprox.):
 8.5”x7.5”x3.5”(215.9mmx190.5mmx88.9mm).
• Enclosureaccommodatesuptotwo(2)
 12VDC/4AHbatteries.
• Productweight(approx.):4.85lbs.(2.2kg).
• Shippingweight(approx.):5.45lbs.(2.47kg).
Altronix Corp.
140 58th St. Brooklyn, NY