Data Sheet

SMP3PMCTX
Supervised Power Supply/Charger
Rev. DSSMP3PMCTX_03312016
Overview
Specifications
SMP3PMCTX
Input:
Input 115VAC, 50/60Hz, 0.65 amp or
230VAC, 50/60Hz, 0.35 amp.
Output:
12VDC or 24VDC selectable output.
2.5 amp supply current.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Battery Backup:
Built-in charger for sealed lead acid or
gel type batteries.
Maximum charge current 0.5 amp.
Zero voltage drop when switching over
to battery backup.
Supervision:
AC fail supervision (form “C” contacts).
Low battery supervision (form “C” contacts).
Visual Indicators:
AC input and DC output LED indicators.
Electrical:
Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.:
- 12VDC: 15.35 BTU/Hr.
- 24VDC: 30.71 BTU/Hr.
System AC input VA requirement:
- 115VAC: 74.75VA.
- 230VAC: 80.5VA.
Mechanical:
Enclosure Dimensions (H x W x D approx.):
13.5” x 13” x 3.25” (343mm x 330mm x 83mm)
- Accommodates up to two (2) 12VDC/7AH batteries.
Product weight (approx.): 7.1 lbs. (3.22 kg).
Shipping weight (approx.): 8.0 lbs. (3.63 kg).
SMP3PMCTX supervised power supply/charger converts a 115VAC/230VAC,
50/60Hz input into a regulated 12VDC or 24VDC output @ 2.5 amp continuous
supply current.
Agency Approvals
European Conformity

Summary of content (2 pages)