Data Sheet
Input:
• Input 115VAC, 60Hz, 2.7 amp.
Output:
• 24VDC output.
• 10 amp supply current.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current 0.7 amp.
• Zero voltage drop when switching over
to battery backup.
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.: 122.84 BTU/Hr.
• System AC input VA requirement: 310.5VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
- Accommodates up to two (2) 12VDC/7AH batteries.
• Product weight (approx.): 11.15 lbs. (5.06 kg).
• Shipping weight (approx.): 12.15 lbs. (5.51 kg).
SMP10C24X
Power Supply/Charger
Rev. DSSMP10C24X - 06012015
Overview
Specifications
SMP10C24X power supply/charger converts a 115VAC / 60Hz input into a
regulated 24VDC output @ 10 amp continuous supply current.
SMP10C24X