Installation Instructions

- 2 - ReServWP
Overview:
ReServWP Outdoor Video Surveillance UPS units are designed to provide power for 24VAC and/or 12VDC cameras during
normal or power outage conditions. True sine wave regulated AC outputs and/or regulated DC outputs.
ReServWP Series Outdoor Video Surveillance UPS Configuration Reference Chart:
Altronix
Model
Number
Output/Supply
Current (A)
Ambient
Temperature
Input
Rating
PTC Protected Power-Limited Outputs 24VAC Outputs 12VDC Outputs
Agency
Listings
UL Listings and
File Numbers
ReServ1WP
24VAC @ 4A (100VA)
and 12VDC @ 2A
-33º to 30º C
115VAC
60Hz,
3.5A
16 12 4
UL File # E329542
UL 60950-1
UL/CUL Listed
for
Information
Technology
Equipment.
UL 60950-22
Information Technology
Equipment - Safety -
Part 22: Equipment to
be Installed Outdoors
24VAC @ 3.5A (85VA)
and 12VDC @ 2A
-33º to 42º C
ReServ2WP
24VAC @ 4A (100VA) -33º to 30º C
115VAC
60Hz,
3.5A
16 16 ----
24VAC @ 3.5A (85VA) -33º to 42º C
ReServ3WP
12VDC @ 8A -33º to 42º C
115VAC
60Hz,
3.5A
16 ---- 16
Specifications:
Stand-by Specifications:
Stand-by Batteries
ReServ1WP - 4A (100VA) load at 24VAC and 2A load at 12VDC max.
ReServ2WP - 4A (100VA) max. load at 24VAC
ReServ3WP - 8A (100VA) max. load at 12VDC
Two (2) 12VDC/7AH 45 minutes
Two (2) 12VDC/12AH 90 minutes
Installation Instructions:
This installation should be made by qualified service personnel and should conform to all local codes and in accordance
with the National Electrical Code. This product contains no serviceable parts.
1. Remove back plate inside the enclosure by removing four (4) mounting screws.
2. Mark and drill desired knockouts on the enclosure to facilitate wiring (Fig. 1, pg. 3).
Note: It is required to use UL Listed outdoor rated conduit hubs with a minimum outdoor rating of 4X.
3. Secure back plate inside the enclosure with four (4) mounting screws.
4. Mount unit in the desired location with the appropriate fasteners utilizing the holes provided on the
enclosure’s flanges (Pgs. 7 and 8). Secure enclosure to earth ground.
Note: This product needs to be secured to the building/pole before operation.
Output:
• PTC protected power-limited outputs are rated @ 1A.
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switchover to stand-by battery when AC fails.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
Visual and Audio Indicators:
• AC/DC power LED indicators.
• Individual power output LED indicators.
• Low voltage input and Shutdown LED indicators.
• Audio AC Fail and Battery Fail indicator.
Additional Features:
• True sine wave regulated AC outputs (ReServ1WP and
ReServ2WP). Regulated DC outputs (ReServ1WP and
ReServ3WP).
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates costly labor.
Enclosure Dimensions (H x W x D):
• NEMA4 / IP66 Rated enclosure.
• Accommodates up to two (2) 12VDC/7AH batteries or
two (2) 12VDC/12AH batteries.
17.375” x 12” x 6.5” (441.3mm x 304.8mm x 165.1mm).