Installation Instructions User guide

RB30 - Relay Module
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
web site: www.altronix.com, e-mail: [e-mail], Lifetime Warranty, Made in U.S.A.
IIRB30 - Rev. 051600 B11I
MEMBER
Specifications:
• 12VDC or 24VDC operation.
• Current draw: 95mA.
• 30 amp/120VAC or 28VDC DPDT contacts.
• UL recognized relay.
Board Dimensions: 2.75”H x 2”W x .75”H
Operation:
1. Mount the RB30 in desired location/enclosure.
2. Set switch to select 12VDC or 24VDC operation.
Closed for 12VDC, Open for 24VDC.
3. Upon proper application voltage (12 or 24) to
terminals marked [POS (+) and NEG (-- )]
relay will actuate, and red LED will be lit.
4. Use output contacts to make and break load circuits.
POS(+) NEG(--) C NO NC
D1
CLOSED/12V
OPEN/ 24V
R2
SW1