Installation Instructions User Manual

ManualsBrandsAltronix ManualsAccessories for electricalR2432600ULCB

Rev. 020504

Rack Mount Series

UL Listed CCTV Power Supplies

Installation Guide

Models Include:

• R2432300UL • R2432300ULCB

- 24VAC @ 12.5 amp (300VA) - 24VAC @ 12.5 amp (300VA)

or 28VAC @ 10 amp (280VA). or 28VAC @ 10 amp (280VA).

- Thirty-two (32) Fuse Protected Outputs. - Thirty-two (32) PTC Protected Outputs.

• R2432600UL • R2432600ULCB

- 24VAC @ 25 amp (600VA) - 24VAC @ 25 amp (600VA)

or 28VAC @ 20 amp (560VA). or 28VAC @ 20 amp (560VA).

- Thirty-two (32) Fuse Protected Outputs. - Thirty-two (32) PTC Protected Outputs.

Summary of content (4 pages)

PAGE 1
Rack Mount Series UL Listed CCTV Power Supplies Installation Guide Models Include: • R2432300UL • R2432300ULCB • R2432600UL • R2432600ULCB - 24VAC @ 12.5 amp (300VA) or 28VAC @ 10 amp (280VA). - Thirty-two (32) Fuse Protected Outputs. - - 24VAC @ 25 amp (600VA) or 28VAC @ 20 amp (560VA). - Thirty-two (32) Fuse Protected Outputs. - 24VAC @ 12.5 amp (300VA) or 28VAC @ 10 amp (280VA). Thirty-two (32) PTC Protected Outputs.
PAGE 2
Overview: These Altronix Rack Mount CCTV Power Supplies provide 24VAC or 28VAC distributed via thirty-two (32) fuse or PTC protected outputs for powering CCTV Cameras, heaters and other video accessories. R2432600UL* R2432600ULCB* 28VAC 10 amp 24VAC 12.5 amp 28VAC 10 amp 24VAC 25 amp 28VAC 20 amp 24VAC 25 amp 32 32 3.5 amp 3 amp 2.5 amp 3 amp 3.5 amp 3.5 amp 6 amp Yes 32 Yes Agency Listings 3.
PAGE 3
Fig. 1 Fig. 1a Fig. 1b Fig. 1c RESET Removable Terminal Block Strain Relief Line Cord P N P N S S S P P N N S Illuminated Power Disconnect Circuit Breaker with manual reset XFMR* XFMR* Divider PTC1 AC Power LED's AC Power LED's AC Power LED's AC Power LED's 24VAC Output (Factory Set) S P 24VAC 28VAC Fig. 1d N AC Power LED's AC Power LED's AC Power LED's 28VAC Output S P N Fig. 1e (Green Wire Earth GND) 24VAC AC Power LED's 28VAC Used on PTC Models 8.
PAGE 4
For fuse protected models: Replace fuses with the same type and rating 3.5A/250V. 3.5A 250V The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock.