Rack Mount UL Listed Power Supply Installation Guide • R1224DC16CB - 12VDC or 24VDC @ 18 amp total supply current. - Sixteen (16) PTC Protected Outputs. Rev.
Overview: These Altronix Rack Mount Power Supplies provide 12VDC or 24VDC distributed via sixteen (16) PTC protected Class 2 Rated outputs for power limited installation. 12VDC 16 18 amp Agency Listing 115VAC 60Hz Input Current Output Current (max per output) PTC Protected Outputs 3.
1. 2. 3. 4. 5. Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 3d, pg. 4). Eliminate the trouble condition (short circuit or overload). Allow 1 minute for PTC to cool off (reset). Set illuminated master power disconnect circuit breaker to the (ON) position (Fig. 3d, pg. 4). All power LEDs will illuminate (Fig. 3, pg. 4). WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
Rack Mechanical Drawing and Dimensions: 5.21”H x 19”W x 8.5”D Fig. 3 3a 3c 3b 1a 1b 1c 1d IEC 320Connector 115VAC 60 Hz. REAR 3.125" 4a 4b 4c 4d 3a 3b 3c 3d 2a 2b 2c 2d 1a 1b 1c 1d 17.625" BOTTOM 3d 8.5" Illuminated master power disconnect circuit breaker: OFF position - Switch not Illuminated. Outputs not powered. RESET (ON) position - Switch illuminated. Outputs powered. Circuit breaker tripped - Switch not Illuminated. Power LEDs on faceplate are not illuminated.
