OLS20E-Installation -Guide

For continuous protection against fire replace fuse with the
same type and rating 5mm - 20mm, 250V, 2A.
LED Diagnostics:
Red (DC) Green (AC) Power Supply Status
ON ON Normal operating condition.
ON OFF Loss of AC. Stand-by battery supplying power.
OFF ON No DC output. Short circuit or thermal overload condition.
OFF OFF Loss of AC. Discharged or no stand-by battery. No DC output.
Terminal Identification:
Terminal
Legend
Function/Description
L, G, N Connect 115VAC to these terminals: Black to Hot, White to Neutral, Green to ground.
+ DC - 12VDC @ 1.0A continuous supply current. 24VDC @ 0.5A continuous supply current.
- BAT + Stand-by battery connections. Maximum charge rate 0.3A.
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
website: www.altronix.com | e-mail: [e-mail] | Lifetime Warranty | Made in U.S.A.
IIOLS20 - Rev. 080905 H25Q
MEMBER
MADE IN USA
LGN
--- BAT +
DC
PTC2
VR1
AC
--- DC +
OFF - 24V
ON - 12V
SW1
ON
1
2A
250V