Spec Sheet

NetWaySP3X
3-port PoE+ Hardened Switch
Rev. NetWaySP3X - 04022018
115/230VAC
Input
230VAC 115VAC
5A 250VA
--- DC ++ BAT –
To Stand-by
Batteries
230VAC 115VAC
LGN
230VAC 115VAC
5A 250VA
--- DC ++ BAT –
To Stand-by
Batteries
To Input of
NetWaySP3B
board
230VAC 115VAC
Factory Reset
IP PoE/PoE+
Device or
NetWaySP1A
PoE/PoE+
or Hi-PoE Device
PoE/PoE+
or Hi-PoE Device
Fiber to
Switch
Input Voltage
Selection Switch
Input Voltage
Selection Switch
LG N
SFP
Spd
Spd
PoE_Data PoE_SPR PoE_SPR
Factory Reset
PoE_Data
Spd
Input:
48V-56VDC
PORT3 (Uplink) Spd: 10/100/1000 PoE: 30W
Altronix Cor
Brooklyn, NY US
www.altronix.com
PORT1 Spd: 10/100/1000 PoE: 30W/60W PORT2 Spd: 10/100/1000 PoE: 30W/60W
Link
3.3V PWR
Link
Link
+
NetwaySP3B
--
PoE
ALOS
Typical Application
- One (1) Gigabit SFP port.
- 120W total power:
- Two (2) 60W ports (PoE/PoE+ / Hi-PoE)
- One (1) 30W port (PoE/PoE+).
- 10/100/1000 Mbps each port.
- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant,
or Hi-PoE (60W).
- PoE activity LED indicators.
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- UL Listed in the U.S. and Canada.
- CE Approved.
- Lifetime Warranty / Made in the U.S.A.
Similar products:
- NetWaySP3WPX - Outdoor 3-port PoE+ Hardened Switch
in NEMA 4/4X, IP66-11 enclosure which accommodates
stand-by batteries.
- NetWaySP3WP - Outdoor 3-port PoE+ Hardened Switch
in NEMA 4/4X, IP66-11 enclosure.
- NetWaySP3WPN - Outdoor 3-port PoE+ Hardened Switch
only in NEMA 4/4X, IP66-11 enclosure.
- NetWaySP3PL - 3-port PoE+ Hardened Switch on Backplane.
- NetWaySP3B - 3-port PoE+ Switch board only.
Key Features
®
SPECTRUM
Description
Altronix NetWaySP3X PoE+ Hardened Switch provides a 1Gb SFP port and two (2)
60W ports and a single 30W port. Cameras/edge devices may be located up to
100m from the unit. Embedded LINQ Technology allows you to monitor, control, and
report power and diagnostics from anywhere.
NetWaySP3X