Spec Sheet

Input
115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
Fiber Ports
One (1) 1Gb SFP port.
Output Power
Two (2) PoE / PoE+ ports, rated up to 30W max.
IEEE 802.3af and IEEE 802.3at compliant.
Ethernet
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5e.
Distance: up to 100m.
Speed: 10/100/1000 Mbps.
Indicators (LED)
Yellow and Green LEDs: IP Link status,
10/100/1000 Base-T/active.
Green PoE LEDs: PoE present.
Green SFP (Fiber) LEDs: SFP connection.
Features
Auto detection and protection of legacy non-PoE cameras/devices.
NEMA 4/4X, IP66-11 enclosure.
Lifetime Warranty
Agency Listings
CE European Conformity.
Physical and Environmental
Dimensions (W x L x H)
13.31” x 11.31” x 5.59” (338.1mm x 287.3mm x 142mm)
Weight (approx.)
Product Weight: 10.5 lb. (4.76 kg).
Shipping Weight: 11.9 lb. (5.4 kg).
Temperature
Operating (30W): – 40ºC to 70ºC (– 40ºF to 158ºF)
Storage: – 40ºC to 75ºC (– 40ºF to 167ºF).
Relative Humidity: 85% +/– 5%.
Operating Altitude: – 304.8 to 2,000m.
Specifications
NetWaySP2PWP
Rev. 11022021
NetWaySP2PWP
3-Port Ethernet over Fiber PoE+ Hardened Switch
Altronix NetWaySP2PWP 3-Port PoE+ hardened switch with internal power converts a single
Fiber (1000Base-X/SX/LX) into two (2) Ethernet ports (10/100/1000 Mbps) and provides
PoE/PoE+ power to connected devices. Mounted in NEMA 4/4X, IP66-11 enclosure, it
features auto detection and protection of legacy non-PoE cameras/devices.
Lifetime Warranty
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com
Typical Application
NetWaySP2P
Converts Fiber
to Ethernet & Provides PoE
Fiber
CAT5e/6
PoE+ (30W) PTZ
CAT5e/6
PoE+ (30W) PTZ
48-56VDC
Input
NetWaySP2P
2-Port Media Converter/Injector
Input: 48–56VDC
Output: IEEE 802.3at (30W) and
IEEE 802.3af (15.4W)
compliant.
48-56VDC
-- Input +
PoE+
Output
PoE+
Output
Fiber
SignalSFP