Installation Instructions

NetWaySP2P Series Installation Guide - 5 -
Recommended Altronix SFP Modules:
Altronix P1MM, P1SM10, P1AB2K and P1GCE are hot-pluggable SFP fiber transceiver modules and are readily
usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates.
P1MM For use with Multi-Mode Fiber for distances up to 550m.
P1SM10 For use with Single-Mode Fiber for distances up to 10km.
P1AB2K For use with Single Strand Single-Mode Fiber for distances up to 2km.
P1GCE For use with CAT5e or better for distances up to 100m.
––––––––––––––––––––––––––––––––––––––––––––––
Fig. 1 - NetWaySP2P Configuration
-- +
PoE LEDs indicate
PoE present
One (1) Gb
SFP port
for Fiber
Structured Cables to
PoE Devices
48VDC to
56VDC
Input
SFP LED
Indicates
data connection
Ground
Terminal
Optional Earth Ground
If needed, insert approx 0.25” into this location until secured in the ground terminal.
NetWaySP2P
2-Port Media Converter/Injector
Input: 48–56VDC
Output: IEEE 802.3at (30W) and
IEEE 802.3af (15.4W)
compliant.
48-56VDC
-- Input +
PoE+
Output
PoE+
Output
Fiber
SignalSFP
Brooklyn, NY, U.S.A.
www.altronix.com
Fig. 1a
Fig. 1b
NetWaySP2P
2-Port Media Converter/Injector
Input: 48–56VDC
Output: IEEE 802.3at (30W) and
IEEE 802.3af (15.4W)
compliant.
48-56VDC
-- Input +
PoE+
Output
PoE+
Output
Fiber
SignalSFP
48-56VDC
-- Input +
Ground
Brooklyn, NY, U.S.A.
www.altronix.com
––––––––––––––––––––––––––––––––––––––––––––––
Fig. 2 - NetWaySP2PWPN Configuration