Spec Sheet

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com
PMK1 - Pole Mount Kit
(order separately)
PMK1 pole mount kit is designed to simplify
installation of outdoor units.
It accommodates 2”- 8”(diameter) poles.
Accessories
NetWaySP1BTWP
802.3bt Media Converter/Injector with Integral Power
®
SPECTRUM
230VAC 115VAC
5A 250VA
--- DC ++ BAT –
To Stand-by
Batteries
230VAC 115VAC
LG N
Fiber to the Switch
or Netway Spectrum
Hardened PoE Switch
Ethernet / Data
802.3bt (90W) compliant IP device
NetWaySP1BT
802.3bt Converter/Injector
Input: 48–56VDC
Output: IEEE 802.3bt (90W)
48-56VDC
-- Input +
802.3bt
Output
Data
Port
Fiber
Signal
PoE
Signal SFP
Ground
Ground
Input Voltage
Selection Switch
Typical Application
SFP Modules - Hot pluggable Transceivers
P1MM Multi-Mode SFP Module for distances up to 550m.
P1SM10 Single-Mode SFP Module for distances up to 10km.
P1AB2K Single Strand SFP Module for
distances up to 2km.
P1GCE Copper SFP Module for distances up to 100m.
4-port Ethernet over Fiber Media Converter with Integral power
for applications utilizing composite or conventional cabling
NetWaySP4P -
Unit passes a maximum power up to 120W per port from a built-in Power Supply/Charger.
Four (4) 1Gb SFP ports.
NetWaySP4P2 -
Unit passes 56VDC power-limited 60W max. per port from a built-in Power Supply/Charger.
Four (4) 1Gb SFP ports.