Installation Guide

NetWaySP1BT Series - 3 -
Overview:
Altronix NetWaySP1BT Series 802.3bt media converter/injectors provide a single 802.3bt (4PPoE) port up to
90W and accommodate Fiber (1000Base-X/SX/LX) or structured cable to transmit data. Units can be deployed
with structured cable, conventional single/multimode fiber or composite cable (fiber + copper combined).
Cameras/edge devices may be located up to 100m from the unit.
Features:
Agency Listings:
• CE European Conformity.
Input:
NetWaySP1BT, NetWaySP1BTWPN:
• 48-56VDC @ 1.9A (95W).
NetWaySP1BTWP, NetWaySP1BTWPX:
• 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
Fiber Port:
• One (1) 1Gb SFP port.
See below for recommended SFP modules.
PoE Port:
• Single port rated up to 90W max.
• IEEE 802.3af, 802.3at and 802.3bt compliant.
Data Port:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e and higher.
• Speed: 10/100/1000 Mbps.
• Distance: up to 100m.
Battery Backup
(NetWaySP1BTWP and NetWaySP1BTWPX):
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
Environmental:
• Refer to Environmental Conditions on page 5.
LED Indicators (Refer to Fig. 4, Pg. 4):
• Yellow and Green LEDs (RJ45 jacks):
Yellow (left) LED: 10/100 Mbps.
Green (right) LED: 1000 Mbps.
• Green PoE LEDs:
Indicate PoE present.
• Green SFP (Fiber) LED:
Indicates SFP connection.
Mechanical:
NetWaySP1BT:
• Modular plastic case.
3.375” x 3.8” x 1” (85.7mm x 96.5mm x 25.4mm).
NetWaySP1BTWPN:
• NEMA4/4X, IP66 Rated enclosure for outdoor use.
• Dimensions (H x W x D approx.):
9.5” x 7.32” x 4.92” (241.3mm x 185.9mm x 125mm)
NetWaySP1BTWP:
• NEMA4/4X, IP66 Rated enclosure for outdoor use.
• Dimensions (H x W x D approx.):
13.31” x 11.31” x 5.59”
(338.1mm x 287.3mm x 142mm).
NetWaySP1BTWPX:
• NEMA4/4X, IP66 Rated enclosure for outdoor use.
• Accommodates four (4) 12VDC/4AH batteries
(48V of backup).
• Dimensions (H x W x D approx.):
17.53” x 15.3” x 6.67”
(445.3mm x 388.6mm x 169.4mm).
Recommended Altronix SFP Modules:
Altronix P1MM, P1SM10, P1AB2K and P1GCE are hot-pluggable SFP fiber transceiver modules and are readily
usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates.
P1MM - For use with Multi-Mode Fiber for distances up to 550m.
P1SM10 - For use with Single-Mode Fiber for distances up to 10km.
P1AB2K - For use with Single Strand Single-Mode Fiber for distances up to 2km.
P1GCE - For use with CAT5e or better for distances up to 100m.