802.3bt Media Converter/Injectors Models include: NetWaySP1BT NetWaySP1BTWP NetWaySP1BTWPN NetWaySP1BTWPX - 802.3bt Media Converter/Injector - Modular plastic case. - 802.3bt Media Converter/Injector. - NEMA4/4X rated outdoor enclosure. - 802.3bt Media Converter/Injector with Integral Power. - NEMA4/4X rated outdoor enclosure. - 802.3bt Media Converter/Injector with Integral Power. - NEMA4/4X rated outdoor enclosure. - Accommodates up to four (4) 12VDC/4AH batteries.
Table of Contents: Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview: Altronix NetWaySP1BT Series 802.3bt media converter/injectors provide a single 802.3bt (4PPoE) port up to 90W and accommodate Fiber (1000Base-X/SX/LX) or structured cable to transmit data. Units can be deployed with structured cable, conventional single/multimode fiber or composite cable (fiber + copper combined). Cameras/edge devices may be located up to 100m from the unit. Features: Agency Listings: • CE European Conformity. Input: NetWaySP1BT, NetWaySP1BTWPN: • 48-56VDC @ 1.9A (95W).
Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. All units should be installed by a trained service personnel. Installation: NetWaySP1BT: 1. Mount NetWaySP1BT in desired location utilizing the mounting hole (Fig. 1a, pg. 4). Use a proper fastener and/or wall anchor when securing NetWaySP1BT with screw through its mounting hole to the wall.
--- DC + Fig. 3 - BAT + NetWaySP1BT 802.3bt Converter/Injector Input: 48–56VDC Output: IEEE 802.3bt (90W) 802.3bt Output PoE Signal Data Port SFP Fiber Signal 5A 250VA 48-56VDC -- Input + 115VAC Ground 230VAC Input Voltage Selection Switch 115VAC 230VAC To Stand-by Batteries Fig. 3a L G N Ground Input/Data Connections: 1. Connect structured cable from port marked [Data Port] on NetWaySP1BT to a PoE midspan/endspan (Fig. 4, pg. 5). 2.
Typical Application: Fig. 5 NetWaySP1BT Converts Ethernet or Fiber to 802.3bt PoE port NetWaySP1BT 802.3bt Converter/Injector Input: 48–56VDC Output: IEEE 802.3bt (90W) Factory connected to power supply 48-56VDC -- Input + 802.3bt Output PoE Signal Data Port SFP Fiber Signal Fiber PoE+ (90W) PTZ Data from Midspan/Endspan CAT5e/6 CAT5e/6 Technical Specifications: Parameter Description Ports One (1) 1Gb SFP port, one (1) Data port. One (1) IEEE 802.3af, 802.3at and 802.
Notes: NetWaySP1BT Series -7-
Wall Mount Installation: 1- Place unit at desired location and secure with mounting screws (not included) (Fig. 6, pg. 8). Fig. 6 Pole Mounting Using Optional Pole Mount Kit PMK1: This installation should be made by qualified service personnel. This product contains no serviceable parts. PMK1 outdoor pole mount kits is designed to simplify the installation of Altronix outdoor rated power supplies and accessories housed in models WP1, WP3 and WP4 NEMA rated enclosures.
NetWaySP1BT Mechanical Drawing and Dimensions (W x L x H approx.): 3.375” x 3.8” x 1” (85.7mm x 96.5mm x 25.
- 10 - 304 Stainless Steel Piano Hinge 7.32” 185.9mm 4.0” 101.6mm 9.32” 236.7mm 8.75” 222.2mm 316 Stainless Steel Padlock Latch Attached 0.375” (9.5mm) Padlock Eye 3.54” 89.9mm 0.312” (7.9mm) TYP 4 Places 4.92” 125mm 0.65” (16.5mm) three (3) 5/8” wiring inlets on NetWay1DWPH and NetWay1DWPMH (only) 1.38” 35.1mm 9.5” 241.3mm 8.0” 203.2mm 1.5” 38mm 1.5” 38mm 6.27” 159.3mm 8.75” 222.2mm 4.35” 110.5mm 1.5” 38mm 0.65” (16.
NetWaySP1BT Series 8.00” (203.2mm) STAINLESS STEEL PIANO HINGE 11.31” (287.3mm) 3.96” (100.6mm) 12.75” (323.9mm) 13.50” (342.9mm) PADLOCK LATCH ATTACHED WITH RIVETS (Ø 0.375” (9.5mm) PADLOCK EYE). Ø 0.32 (8.1mm) MOUNTING HOLE TYP. 4 PLACES 5.59” (142mm) 13.31” (338.1mm) 1.61” (40.9mm) 10-32 X 0.375” (9.6mm) BRASS INSERT (X4) 10.00” (254mm) 8.25” (209.6mm) 10.75” (273.1mm) 10-32 X 0.25” (6.4mm) BRASS INSERT (X2) 12.00” (304.8mm) 10.25” (260.
- 12 - A 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. IINetWaySP1BT Series L05S A 12.00” 304.8mm END VIEW 15.3” 388.6mm FRONT VIEW 16.73” 425mm MOUNTING PLATE 0.125” (3.2mm) SECTION A-A 316 STAINLESS STEEL PADLOCK LATCH ATTACHED WITH RIVETS. Ø.375 PADLOCK EYE 5.00” 127mm 5.77” 0.75” 146.6mm 19.1mm 4.94” 125.5mm 6.41” 162.8mm Ø.32” (8.
