Media Converters Installation Guide Models Include: NetWaySP8A - 8-Port Media Converter/Repeater NetWaySP16A - 16-Port Media Converter/Repeater DOC#: NETSP8A_16A Rev. 060517 More than just power.
Overview: Altronix NetWaySP8A and NetWaySP16A media converter/repeaters convert a 10/100/1000 Mbps to Fiber (1000Base-X/SX/LX). Features: Agency Listings: • UL/cUL • CE Ethernet: NetWaySP8A: NetWaySP16A: UL 60950-1 (Information Technology Equipment). European Conformity. Input: NetWaySP8A: NetWaySP16A: LED Indicators: • Ethernet (RJ45): Green LED = 1Gbps Yellow/orange LED = 10/100 Mbps. • Link SFP LED: Indicates SFP connection. 115VAC, 60Hz, 0.5A or 230VAC, 50/60Hz, 0.3A.
Recommended Altronix SFP Modules: Altronix P1MM and P1SM10 are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1Gb transmission rates. P1MM - For use with Multi-Mode Fiber for distances up to 550m. P1SM10 - For use with Single-Mode Fiber for distances up to 10km. Typical Application: Fig.
Rack Mount Installation Mounting Options: 1. Remove and discard factory installed screws from both sides of rack chassis (Fig. 3a). 2. Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 3b). 3. Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 3c). Fig. 3 Fig. 3a Fig. 3b Top Fig. 3c Top Top Front Left Front Left Front Left B Remove A Wall Mount Installation 1.
