Installation Guide

NetWayG - 5 -
PoE/PoE+
Output
LED
Structured
Cable to
PoE/PoE+
Camera/Device or
next NetWayXTG
Port Status
LEDs
PoE/PoE+
Input
LED
NetwayXTG
Repeater
IN
OUT
PoE/PoE+
Output
PoE/PoE+
Input
www.altronix.com
Made in U.S.A.
Structured Cable from
Midspan or Endspan
(10/100/1000)
Technical Specifications:
Parameter Description
No. of Ports
NetWay8G: Eight (8) PoE/PoE+ Ports (10/100/1000 Mbps).
NetWay8GP: Eight (8) PoE/PoE+/Hi-PoE Ports (10/100/1000 Mbps).
NetWay16G: Sixteen (16) PoE/PoE+ Ports (10/100/1000 Mbps).
Input Power
Requirements
NetWay8G: 115VAC, 60Hz, 3.25A or 230VAC, 50/60Hz, 2.0A.
NetWay8GP: 115VAC, 60Hz, 5.5A or 230VAC, 50/60Hz, 3.0A.
NetWay16G: 115VAC, 60Hz, 5.5A or 230VAC, 50/60Hz, 3.0A.
Indicators
Port Status LEDs.
Environmental
Conditions
Operating Ambient Temperature: – 20ºC to 50ºC (– 4ºF to 122ºF).
Relative Humidity: 85%, +/– 5%.
Storage Temperature: – 20ºC to 70ºC (– 4ºF to 158ºF).
Operating Altitude: Up to 2,000m.
Weights
(approx.)
NetWay8G NetWay8GP NetWay16G
Product Weight:
6.06 lbs (2.75 kg).
Shipping Weight:
8.0 lbs. (3.63 kg).
Product Weight:
6.06 lbs (2.75 kg).
Shipping Weight:
8.0 lbs. (3.63 kg).
Product Weight:
6.06 lbs (2.75 kg).
Shipping Weight:
8.0 lbs. (3.63 kg).
Fig. 3 - NetWayXTG
Installing a NetWayXTG Repeater Module:
NetWayXTG will work with PoE/PoE+ devices.
NetWayXTG is not intended to be connected to outside plant leads.
1. Mount NetWayXTG in desired location utilizing the mounting hole (Fig. 3a, pg. 5).
Use a proper fastener and/or wall anchor when securing NetWayXTG to the wall.
2. Connect structured cable from port marked [OUT] on NetWayG to port marked [IN]
on the NetWayXTG (Fig. 3b, pg. 5).
3. Connect structured cable from port marked [OUT] on NetWayXTG to the PoE camera/ device or next
NetWayXTG repeater (Fig. 3b, pg. 5, Fig. 4, pg. 6 ).
4. Port status LEDs will illuminate on NetWayXTG indicating the port is operational
(Fig. 3a, pg. 5, refer to Port LED definitions below).
Port LED Definitions for NetWayXTG Repeater:
Status PoE/PoE+ Output LED Green LED Yellow LED
OFF No PoE/PoE+ Output Indicates no link. Indicates no link
ON Normal PoE/PoE+ Output Indicates 1G link Indicates 10/100 link
Blinking – Indicates 1G activity Indicates 10/100 activity