Power over the Ethernet PoE Midspan Solution for Standard Network Infrastructure Installation Guide Models Include: NetWay8 - Eight (8) Port PoE Midspan Injector Rev. 121010 NetWay16 - Sixteen (16) Port PoE Midspan Injector More than just power.
Overview: Altronix NetWay8/NetWay16 Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/ edge devices may be located up to 100m (328 ft.) from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement.
Port Status and LED Flash Codes: Port Status Flash Codes Description All Ports Off Sequential LED Port Scan No devices connected Port Off OFF LED OFF Port On ON LED ON Class 4 detection Port Blinks 2 times Non-compliant Port 2Hz Port Overload Fault 5Hz 4 Port Overload Grouped 5Hz 4 LEDs 8 Port Overload Grouped 5Hz LED’s 1-8 Power Supply Overload for ports 1-8. LED’s 9-16 Power Supply Overload for ports 9-16. Fig.
Installing a NetWay1512 adapter for 12VDC IP cameras up to 13W: 1. Mount NetWay1512 in proximity to IP camera (Fig. 2, pg. 4). Affix one side of velcro (supplied) to NetWay1512 and the place the second side of the velcro in the desired location. 2. Connect structured cable from port marked [IN] on Fig. 2 - NetWay1512 NetWay1512 to any ports marked [OUT] of NetWay (Fig. 2, pg. 4, Fig. 1a, pg. 3). 3. Connect structured cable from port marked [OUT] on NetWay1512 to the IP camera (Fig. 2, pg. 4). Netway1512 4.
NetWay8/NetWay16 Typical Application: Fig. 4 NetWayXT Extends Ethernet 100m (328 ft.) I.T.E. 43KC NetwayXT Repeater PoE Camera www.altronix.com Power OUT IN Card Reader PoE Camera Strike HID Solo PoE + Camera NetWay1512 Netway1512 I.T.E. 43KC Adapter www.altronix.com IN OUT 12VDC + Output --- 12VDC IP camera NetWay8M Ethernet Switch NVR/Network Server Technical Specifications: Parameter Description No. of Ports NetWay8 - Eight (8) Ports. NetWay16 - Sixteen (16) Ports.
NetWay8M/NetWay16M Rack Mount Chassis Mechanical Drawing & Dimensions: Fig. 6 19.125" .75" 17.625" 8.5" 1.625" AC POWER (ON) The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of an insulated “DANGEROUS VOLTAGE” within the products enclosure that may be of sufficient magnitude to constitute an electric shock.
Mounting Options: Rack Mount Installation 1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 7a). 2- Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 7b). 3- Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 7c). Fig. 7 Fig. 7a Fig. 7b Fig.
Notes: Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 website: www.altronix.com, e-mail: info@altronix.com, Made in U.S.A.
