Installation Instructions

NetWay1/NetWay1X - 3 -
Typical Applications (NetWay1 and NetWay1X):
Fig. 3
Fig. 4
Fig. 5
Fig. 6 - Typical UL294 application (NetWay1 only):
Maintenance:
Unit should be tested at least once a year for the proper operation as follows:
While the NetWay1/NetWay1X is powered and the output is connected to a suitable UL Listed PoE device, it should be
tested for PoE shutdown operation (For UL 60950-1 applications only).
For UL294 applications, the NetWay1 is to be tested as part of a complete Access Control System and in accordance
with listed Access Control Devices.
Troubleshooting:
Refer to NetWay1/NetWay1X Port Status and LED Flash Codes, pg. 2.
PC/Server
Network Switch
CAT-5
100m
UL Listed
Access Control
Power Limited
Power Supply
24VDC/24VAC
Card
Reader
Electric
Strike
HID
Solo Edge
Device
NetWay1
Video Monitor
NVR/Network Server
Network Switch
NetWay1/NetWay1X
PoE Camera
CAT-5
100m
Port shutdown
input
24VAC/
24VDC input
NVR/Network Server
NetWay1512
Network Switch
12VDC
IP Camera
CAT-5
100m
24VAC/
24VDC input
Port shutdown
input
Video Monitor
NetWay1/NetWay1X
NVR/Network Server
Network Switch
24VAC/
24VDC input
PoE Camera
CAT-5 additional
100m
CAT-5
100m
Port shutdown
input
NetWay1/NetWay1X
NetwayXT
Video Monitor