Data Sheet

Input:
• 115VAC 60Hz, 1.5A.
Data:
• One (1) PoE port provides power and passes data
over ethernet (CAT5) cable up to 100m.
• Data rate: 10/100/1000Base-T.
Output Power:
• IEEE 802.3af (15W) & IEEE 802.3at (30W)
compliant.
• Supports LTPoE++™ 70W, 52.7W & 38.7W PD
compliant devices up to 100m.
• Short circuit and overload protection.
Features:
• Auto detection and protection of legacy
non-PoE cameras/devices.
• Port status LEDs.
Features (cont’d):
• Manual PoE shutdown (Spring terminals).
• IEC 320 - 3-wire grounded line cord (detachable).
Electrical:
• Operating temperature:
85W: -20º C to 49º C ambient.
55W: -20º C to 55º C ambient.
• 32 BTU/Hr.
• System AC input VA requirement: 172.5VA.
Mechanical:
• Unit can be wall or shelf mounted.
• Enclosure Dimensions (H x W x D approx.):
1.625” x 4” x 7.25”
(41.275mm x 101.6mm x 184.15mm)
• Product weight (approx.): 2.2 lbs. (1.0 kg).
• Shipping weight (approx.): 3.2 lbs. (1.45 kg).
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Altronix NetWay1E is an enhanced 10/100/1000Base-T PoE midspan power
injector. It is fully compliant and backwards compatible with PoE (15W) and
PoE+ (30W) devices. The NetWay1E is also capable of sourcing up to 85W
with devices incorporating LTPoE++™ 70W, 52.7W & 38.7W, requiring up to
70W of power at up to 100m.
NetWay1E
Single Port Hi-PoE Injector for Standard and
Enhanced Power Network Infrastructure
Rev. DSNetWay1E_051916
Overview
Specifications
Typical Application:
Structured
Cable from
Network Switch
12VAC to 24VAC or
5VDC to 24VDC input
for Remote Manual
PoE Shutdown
Structured
Cable to
IP Camera
--- +
PoE
ShutdownINOUT
PoE
ON
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Agency Approvals
®
NetWay1E