Spec Sheet

Altronix NetWay16 Midspans provide power and
pass data (video) for PoE compliant
cameras/devices. Sixteen ports in a space saving
1U EIA 19” rack mount chassis.
Cameras/devices may be located up to 100m
(328 ft.) from the NetWay unit. A NetWayXT repeater module can be
utilized to extend the distance an additional 100m (328 ft.) for a
total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.)
is possible using multiple repeaters, based on camera/device port
requirement. NetWay Midspans are capable of supporting
non-PoE compliant fixed and PTZ IP cameras by utilizing NetWay1512 or NetWay3012 adapters.
Input:
• 115VAC 50/60Hz, 2 amp.
• Primary fuse (internal) is rated at 5 amp/250V.
Power:
• Sixteen (16) PoE complaint ports.
• Power Outputs:
Sixteen (16) ports rated 15.4W max.
per IEEE 802.3af.
Four (4) of the ports are selectable for 30W
to accommodate non-PoE complaint IP fixed or PTZ
cameras (requires NetWay3012 adapter for each
camera port).
• Unit provides up to 15.4W max. power per port.
IEEE 802.3af compliant.
• Short circuit protection.
Features:
• Easy plug and play installation.
• Safe and cost effective power distribution
over CAT5/5E/6 LAN infrastructure.
• Automatic detection and protection of legacy
non-PoE cameras.
Features (cont’d):
• Port status LED indicators.
• Illuminated master power disconnect circuit breaker
with manual reset (switch).
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack or shelf mounted.
• 1U rack mount chassis for use in standard
EIA 19” rack.
Accessories:
NetWay1512:
• 15W adapter for non-PoE compliant IP cameras.
NetWay3012:
• 30W adapter for non-PoE compliant IP
fixed or PTZ cameras..
NetWayXT:
• PoE repeater module extends range 100m (328 ft.).
Shipping Weight (approximate):
- NetWay16: 7.45 lbs.
NetWay16 - PoE Midspan Solution for Standard
Network Infrastructure
Rev. DSNetWay16 - F16I
Overview
Specifications
®
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).