Data Sheet

ManualsBrandsAltronix ManualsComputers & Accessories2 Power Supply/Chargers - 12 or 24VDC

Maximal75FE Expandable Power System provides system designers and installers

with optimum power choices and the highest levels of versatility. It provides 12VDC

and 24VDC via two (2) single output power supply/chargers. System includes AC

fail, low battery and battery presence monitoring. Enclosure facilitates up to four (4)

12VDC/12AH batteries. All interconnecting equipment must be UL Listed.

Maximal75FE

Expandable Power System

Rev. DSMaximal75FE_05192015

Overview

Specifications

Optional Field Installable UL Listed Sub Assembly Modules

Maximal75FE

Location A - ACM4, ACM4CB, MOM5, PD4UL, PD4ULCB,

PD8UL, PD8ULCB, PD16W & PD16WCB.

Power Supply

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Location B - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,

PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.

Input:

• 120VAC 60Hz, 8.0 amp input.

Output:

• 12VDC and 24VDC outputs.

• Maximum output current:

Options P/S 1 P/S 2

A 24VDC @ 10 amp 12VDC @ 10 amp

• Non power-limited outputs.

• Aux. power-limited output rated @ 1 amp (unswitched).

• Overvoltage protection.

Fuse Ratings:

• Power Supply input fuse rated @ 5 amp/250V.

Fire Alarm Disconnect:

• Supervised Fire Alarm disconnect (latching or

non-latching) 10K EOL resistor. Operates on a

normally open (NO) or normally closed (NC) trigger.

Supervision:

• AC fail supervision (form “C” contacts).

- Notification trigger is selectable for

30 seconds (factory set) or 2 hours.

• Battery fail & presence supervision (form “C” contacts).

Supervision (cont’d):

• Low power shutdown. Prevents deep battery discharge.

Battery Backup:

• Built-in charger for sealed lead acid or gel type batteries.

• Maximum charge current 1.54 amp.

• Automatic switch over to stand-by battery when AC fails.

• Battery fuses rated @ 15A/32V.

Visual Indicators:

• Green AC Power LED indicates 120VAC present.

• AC input and DC output LED indicators.

Electrical:

• Operating temperature: 0º C to 49º C ambient.

• BTU/Hr.: 184.26 BTU/Hr.

• System AC input VA requirement: 960VA.

Mechanical:

• Enclosure Dimensions (H x W x D approx.):

26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm)

• Enclosure accommodates up to four (4) 12AH batteries.

• Product weight (approx.): 32.3 lbs. (14.66 kg).

• Shipping weight (approx.): 39.45 lbs. (17.9 kg).

Location C - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,

PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.

Summary of content (2 pages)

PAGE 1
Maximal75FE Expandable Power System Rev. DSMaximal75FE_05192015 Overview Maximal75FE Expandable Power System provides system designers and installers with optimum power choices and the highest levels of versatility. It provides 12VDC and 24VDC via two (2) single output power supply/chargers. System includes AC fail, low battery and battery presence monitoring. Enclosure facilitates up to four (4) 12VDC/12AH batteries. All interconnecting equipment must be UL Listed.
PAGE 2
Agency Approvals UL Listed for Access Control System Units (UL 294). CSFM California State Fire Marshal Approved. Altronix Corp. 140 58th St. Brooklyn, NY ULC-S319-05 - Electronic Access Control Systems Class I equipment. CSA C22.2 No.205 - Signal Equipment. Enclosure Dimensions (H x W x D approximate): 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm) 19” (482.6mm) 2” (50.8mm) 4” (101.6mm) 4” (101.6mm) 7” (177.8mm) 2” (50.8mm) 6.25” (158.75mm) TOP 1.25” (31.75mm) 0.85” (21.59mm) 19” (482.