Installation Guide

Maximal3F/Maximal5F/Maximal7F Access Power Controllers (Fused) - 9 -
FACP Hook-Up Diagrams:
Fig. 5 Polarity reversal input from FACP signaling circuit
output (polarity is referenced in alarm condition):
Fig. 6 Normally Open - Non-Latching FACP Fig. 7 Normally Open FACP Latching trigger input
trigger input: with reset:
(This output has not been evaluated by UL)
Fig. 8 Normally Closed - Non-Latching FACP Fig. 9 Normally Closed - Latching FACP trigger input
trigger input: with reset:
(This output has not been evaluated by UL)
CUT
JUMPER
FROM FACP
OUTPUT
CIRCUIT
+
--
FACP
OUTPUT EOL
TRG
NO C NC
FACP INTERFACE
JUMPER
N.C. DR
Y
TRIGGER
INPUT
TRG
NO C NC
FACP INTERFACE
N.C. TRIGGER
INPUT
N.C. RESET
SWITCH
JUMPER
TRG
N.O. TRIGGER
INPUT
TRG
NO C NC
FACP INTERFACE
N.C. RESET
SWITCH
N.O.
TRIGGER
INPUT
JUMPER
TRG
NO C NC