Data Sheet

ManualsBrandsAltronix Manualselectrical equipment & suppliesMAXIMAL55E

Maximal55E provides system designers and installers with maximum power

choices and the highest levels of versatility. It provides 12VDC via two (2)

single output power supply/chargers. It includes AC fail, low battery and battery

presence monitoring. Optional Altronix

field installable sub-assemblies pro-

vide multiple outputs and a wide range of features for specific Access Control

and Fire Alarm applications.

Maximal55E

Expandable Power System

Rev. DSMaximal55E_05062015

Overview

Specifications

Input:

• 115VAC 60Hz, 5.2 amp input.

Output:

• 12VDC outputs.

• Maximum output current:

Options P/S 1 P/S 2

A 12VDC @ 10 amp 12VDC @ 10 amp

• Filtered and electronically regulated outputs (built-in

power supply).

• Thermal and short circuit protection with auto reset.

Fuse Ratings:

• Power Supply input fuse rated @ 3.5 amp/250V.

Supervision:

• AC fail supervision (form “C” contacts).

- Notification trigger is selectable for

30 seconds (factory set) or 6 hours.

• Low battery and battery presence supervision

(form “C” contact).

Battery Backup:

• Built-in charger for sealed lead acid or gel type batteries.

• Maximum charge current 0.7 amp per p/s board.

• Automatic switch over to stand-by battery when

AC fails.

• Zero voltage drop when unit switches over to battery

backup (AC failure condition).

Visual Indicators:

• AC input and DC output LED indicators.

Electrical:

• Operating temperature: 0º C to 49º C ambient.

• BTU/Hr.: 122.84 BTU/Hr.

• System AC input VA requirement: 598VA.

Mechanical:

• Enclosure Dimensions (H x W x D approx.):

26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm)

• Enclosure accommodates up to four (4) 12AH batteries.

• Product weight (approx.): 43.5 lbs. (19.73 kg).

• Shipping weight (approx.): 47.5 lbs. (21.55 kg).

Optional Field Installable UL Listed Sub Assembly Modules

Location A - ACM4, ACM4CB, MOM5, PD4UL, PD4ULCB,

PD8UL, PD8ULCB, PD16W & PD16WCB.

Power Supply

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Stand-by

Battery

(optional)

Location B - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,

PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.

Location C - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,

PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.

Maximal55E

Summary of content (2 pages)

PAGE 1
Maximal55E Expandable Power System Rev. DSMaximal55E_05062015 Overview Maximal55E provides system designers and installers with maximum power choices and the highest levels of versatility. It provides 12VDC via two (2) single output power supply/chargers. It includes AC fail, low battery and battery presence monitoring. Optional Altronix® field installable sub-assemblies provide multiple outputs and a wide range of features for specific Access Control and Fire Alarm applications.
PAGE 2
Agency Approvals CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment. UL Listed for Access Control System Units (UL 294). Altronix Corp. 140 58th St. Brooklyn, NY CSFM California State Fire Marshal Approved. Enclosure Dimensions (H x W x D approximate): 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm) 19” (482.6mm) 2” (50.8mm) 4” (101.6mm) 4” (101.6mm) 7” (177.8mm) 2” (50.8mm) 6.25” (158.75mm) TOP 1.25” (31.75mm) 0.85” (21.59mm) 19” (482.6mm) 8.9” (226.06mm) 1.25” (31.75mm) 0.