Installation Guide

Maximal3D/Maximal5D/Maximal7D Access Power Controllers (PTC) - 7 -
Power Supply Board Stand-by Battery Specifications:
Altronix
Model:
Power Supply Board Battery
20 Min.
of Backup
4 hr. of Backup
24 hr. of
Backup
Maximal3D
AL600ULXB
(Refer to Fig. 1a, pg. 7 for Switch
[SW1] location and position)
12VDC/40AH* N/A 5.0A N/A
24VDC/40AH* N/A 5.4A 0.7A
Maximal5D
AL1012ULXB
(Factory set at 12VDC)
12VDC/12AH 9.0A
Battery capacity for emergency
stand-by at least 20 min.
N/A
Maximal7D
AL1024ULXB2
(Factory set at 24VDC)
24VDC/12AH 7.7A 1.2A 200mA
24VDC/65AH* N/A 7.7A 1.2A
*Note: Additional battery enclosure required (Figs. 5-7, pgs. 11-13).
Power Supply Board Output Voltage Settings:
Maximal3D
Power Supply Board
+ DC ---
OFF - 24V ON - 12V
ON
ON
OFF - 24V
ON - 12V
Fig. 1a
Fig. 1