Installation Guide

Maximal Expandable Power Systems - 3 -
MaximalE Overview:
Maximal Expandable Power System provide system designers and installers with maximum power choices and the highest
levels of versatility. They provide 12VDC, 24VDC, or 12VDC and 24VDC simultaneously via two (2) single output power
supply/chargers. Includes AC fail, low battery and battery presence monitoring. Custom enclosure facilitates up to four (4)
12VDC/12AH batteries. All interconnecting equipment must be UL Listed.
MaximalE Series Configuration Chart:
Altronix
Model
Number
Output Voltage Options
Non Power- Limited Outputs Class 2 Rated Power-Limited 115VAC 60 Hz Input (current) Power Supply Board Input Fuse Rating Power Supply Board Output Fuse Rating Agency Listings and File Numbers
Power Supply 1 Power Supply 2
Maximal11E
AL400ULXB2 AL400ULXB2
--- 2 7.0A 5A/250V 15A/32V
California State
Fire
Marshal Approved
UL File # BP6714
UL 294
UL Listed for
Access Control
System Units.
General Signaling
Equipment
Evaluated to
CSA Standard
C22.2
No.205-M1983
12VDC @ 4A 12VDC @ 4A
12VDC @ 4A 24VDC @ 3A
24VDC @ 3A 24VDC @ 3A
Maximal13E
AL400ULXB2 AL600ULXB
1 1 7.0A 5A/250V
15A/32V
(AL400ULXB2)
12VDC @ 4A 12VDC @ 6A
12VDC @ 4A 24VDC @ 6A
24VDC @ 3A 12VDC @ 6A
24VDC @ 3A 24VDC @ 6A
Maximal33E
AL600ULXB AL600ULXB
2 --- 7.0A 5A/250V ---
12VDC @ 6A 12VDC @ 6A
12VDC @ 6A 24VDC @ 6A
24VDC @ 6A 24VDC @ 6A
Maximal35E
AL600ULXB AL1012ULXB
2 --- 6.1A 5A/250V
15A/32V
(AL1012ULXB)
12VDC @ 6A 12VDC @ 10A
24VDC @ 6A 12VDC @ 10A
Maximal37E
AL600ULXB AL1024ULXB2
2 --- 7.9A
5A/250V
(AL600ULXB
and
AL1024ULXB2)
15A/32V
(AL1024ULXB2)
12VDC @ 6A 24VDC @ 10A
24VDC @ 6A 24VDC @ 10A
Maximal55E
AL1012ULXB AL1012ULXB
2 --- 5.2A 5A/250V 15A/32V
12VDC @ 10A 12VDC @ 10A
Maximal75E
AL1012ULXB AL1024ULXB2
2 --- 7.0A
5A/250V
(AL1012ULXB
and
AL1024ULXB2)
15A/32V
(AL1012ULXB
and
AL1024ULXB2)
12VDC @ 10A 24VDC @ 10A
Maximal77E
AL1024ULXB2 AL1024ULXB2
2
--- 8.8A 5A/250V 15A/32V
24VDC @ 10A 24VDC @ 10A
MaximalE Features:
• Filtered and electronically regulated outputs
(built-in power supply).
• Built-in charger for sealed lead acid or gel type batteries.
• AL400ULXB2, AL600ULXB and AL1012ULXB
(Power Supply Board) maximum charge current 0.7 amp.
AL1024ULXB2 (Power Supply Board) maximum charge
current 3.6 amp.
• Automatic switch over to stand-by battery when AC fails.
• Zero voltage drop when unit switches over to
battery backup (AC failure condition).
• Low battery and battery presence supervision
(form “C” contact).
Altronix Corp.
140 58th St. Brooklyn, NY