Data Sheet

Maximal11E provides system designers and installers with maximum power
choices and the highest levels of versatility. It provides 12VDC, 24VDC, or
12VDC and 24VDC simultaneously via two (2) single output power supply/
chargers. It includes AC fail, low battery and battery presence monitoring.
Optional Altronix
®
field installable UL Listed sub-assemblies provide mul-
tiple outputs and a wide range of features for specific Access Control and Fire
Alarm applications.
Maximal11E
Expandable Power System
Rev. DSMaximal11E_05062015
Overview
Specifications
Optional Field Installable UL Listed Sub Assembly Modules
Maximal11E
Location A - ACM4, ACM4CB, MOM5, PD4UL, PD4ULCB,
PD8UL, PD8ULCB, PD16W & PD16WCB.
A
Power Supply
Power Supply
Stand-by
Battery
(optional)
Stand-by
Battery
(optional)
Stand-by
Battery
(optional)
Stand-by
Battery
(optional)
B
C
Location B - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,
PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.
Input:
• 115VAC 60Hz, 7.0 amp input.
Output:
• 12VDC and/or 24VDC outputs.
• Maximum output current:
Options P/S 1 P/S 2
A 12VDC @ 3.5 amp 12VDC @ 3.5 amp
B 24VDC @ 2.7 amp 24VDC @ 2.7 amp
C 12VDC @ 3.5 amp 24VDC @ 2.7 amp
• Class 2 Rated power-limited outputs.
• Filtered and electronically regulated outputs (built-in
power supply).
• Thermal and short circuit protection with auto reset.
Fuse Ratings:
• Power Supply input fuse rated @ 3.5 amp/250V.
Supervision:
• AC fail supervision (form “C” contacts).
- Notification trigger is selectable for
30 seconds (factory set) or 6 hours.
• Low battery and battery presence supervision
(form “C” contact).
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Maximum charge current 0.7 amp per p/s board.
• Automatic switch over to stand-by battery when
AC fails.
• Zero voltage drop when unit switches over to battery
backup (AC failure condition).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.:
- 12VDC: 43.00 BTU/Hr.
- 24VDC: 66.33 BTU/Hr.
- 12VDC and 24VDC: 54.66 BTU/Hr.
• System AC input VA requirement: 805VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm)
• Enclosure accommodates up to four (4) 12AH batteries.
• Product weight (approx.): 42.3 lbs. (19.17 kg).
• Shipping weight (approx.): 46.3 lbs. (21.00 kg).
Location C - ACM4, ACM4CB, ACM8, ACM8CB, MOM5,
PD4UL, PD4ULCB, PD8UL, PD8ULCB, PD16W & PD16WCB.