Spec Sheet
Description
Altronix MaxFit7F16APS Access Power Controller distributes and switches power to
access control systems and accessories. It converts a 120VAC, 60Hz input into six-
teen (16) distributed 24VDC fuse protected outputs and sixteen (16) independently
controlled 12VDC or 24VDC fuse protected relay outputs. Fail-Safe/Fail-Secure power
outputs may be converted to dry form “C” contacts. Relays are activated by an open
collector sink or normally open (NO) dry trigger input from an Access Control System,
Keypad, Push Button, REX PIR, etc. Unit will route power to a variety of access control
hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc.
The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to
trigger other auxiliary devices. The fire alarm disconnect feature is individually select-
able for any or all of the sixteen (16) relay outputs.
MaxFit7F16APS
Access Power Controller
Rev. MaxFit7F16APS - 05182020
- 24VDC @ 10A power supply/charger.
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- Outputs:
- Sixteen (16) distributed 24VDC fused protected outputs.
- Sixteen (16) independently controlled 12VDC or 24VDC
fuse protected relay outputs.
- Convenient knockout configuration:
- Twelve (12) double knockouts (1” and 0.75”).
- 16 AWG powder-coated steel enclosure simplifies board layout
and wire management.
- Enclosure accommodates up to four (4) 12VDC/12AH batteries.
Key Features
Lifetime Warranty / Made in the U.S.A.
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
MaxFit7F16APS
Accessories
Network Supervision
Altronix model LINQ2 Network Communication Module provides remote supervision,
control and monitoring over LAN/WAN
- Remotely reports accurate power diagnostics
- Controls power and resets devices
- Reports system diagnostics via Email
™