Spec Sheet
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
LINQ8ACM and LINQ8ACMCB
Network Access Power Controllers
Input
Two (2) Independent Low Voltage Inputs.
Input Voltage Options:
Single Input:
Input1: 12 or 24 VDC from eFlow series power supply.
Dual Input Option 1:
- Input 1: 12 or 24 VDC from eFlow series power supply.
- Input 2:
a) 12 or 24 VDC from eFlow series power supply.
b) 5 or 12 VDC from VR6 voltage regulator.
Dual Input Option 2:
12 and 24 VDC from Tango1B PoE Driven Power Supply.
Voltage Range
LINQ8ACM: 5VDC to 24VDC, up to 10A each or
20A total input.
LINQ8ACMCB: 5VDC to 24VDC up to 10A each or
16A total input.
Current 0.6A @ 12V, 0.3A @ 24V
Consumption: with all relays energized.
Main Fuse Rating 15/32A.
Outputs
LINQ8ACM: Fuse protected outputs rated @ 2.5A per output,
non power-limited. Total output 20A max.
LINQ8ACMCB: PTC protected outputs rated @ 2A per output,
Class 2 power-limited. Total output 16A max.
Do not exceed the individual power supply ratings.
Any of the eight (8) fuse/PTC protected power outputs are selectable
to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Output Ratings:
LINQ8ACM: Fuses are rated 3A/32V each.
LINQ8ACMCB: PTCs are rated 2A each.
Total output current is determined by the power supply(ies),
not to exceed a maximum of 10A for each input.
Programming Features:
Eight (8) Programmable Outputs:
- Fail-safe, fail-secure or auxiliary outputs.
- Input controlled or manually controlled through software.
- High (over) and low (under) voltage and current monitoring by output.
- Multiple outputs may be programmed to be triggered by a single input.
- Battery back-up by output.
Programming Features (cont’d):
Eight (8) Programmable Trigger Inputs:
- Normally open (NO).
- Normally colsed (NC).
- Open collector sink inputs.
- Wet Input (5VDC - 24VDC) with 10k resistor.
- Any combination of the above.
Other Programmable Trigger Inputs:
- Monitor power supply(ies) input for voltage and currect limits (high/low).
- Input and output current calibration.
- Programmable timer events.
- Programmable user levels.
- Enable or disable alerts by type.
- Programmable alert reporting delay.
Fire Alarm Disconnect
Supervised Inactive, latching or non-latching, individually
selectable for any or all of the eight (8) outputs.
EOL 10K Resistor.
LED Indicators
Green AC LED: indicates AC trouble condition.
Green BAT LED: indicates battery trouble condition.
Green FACP LED: indicates FACP disconnect is triggered.
Flashing Blue Heartbeat LED: indicates network connection.
Individual OUT1 - OUT8 Red LEDs: indicate outputs are triggered.
Individual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red).
Physical and Environmental
Dimensions (W x L x H)
8” x 4.5” x 1.25” (203.2mm x 114.3mm x 31.8mm).
Product Weight 0.7 lb. (0.32 kg).
Shipping Weight 0.95 lb. (0.43 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 93% +/-5%.
BTU/Hr. (approx.): 4 BTU/Hr.
Mounting hardware included.
Specifications
™
VR6
Voltage Regulator
Converts a 24VDC input into a regulated 5VDC
or 12VDC selectable output at up to 6A.
Altronix VR6 & LINQ8ACM(CB) easily snap
together to provide 5VDC or 12VDC and 24VDC
simultaneously – individually selectable for each of
the 8 outputs... all on one footprint!
Accessories
Tango1B
PoE Driven Power Supply
Converts an IEEE802.3bt 4PPoE input into a
regulated 24VDC and/or 12VDC output up to 65W.
Eliminates the need for high voltage power supply
inside of an enclosure. 8-pin connector allows for
stacking with compatible Altronix sub-assemblies
such as LINQ8ACM(CB), saving enclosure space.