Spec Sheet

LINQ8ACM and LINQ8ACMCB

Network Access Power Controllers

Rev. LINQ8ACM - 10222019

™

Description

Altronix LINQ8ACM and LINQ8ACMCB are dual input network access power controllers which can be

installed in Altronix wall and rack mount enclosures to facilitate access control deployment. Access

Power Controller’s dual input design allows power to be steered from one (1) or two (2) independent low

voltage 12 or 24 VDC Altronix power supplies to eight (8) independently controlled fuse (LINQ8ACM) or

PTC (LINQ8ACMCB) protected outputs. Outputs are activated by an open collector sink, normally open

(NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader,

Keypad, Push Button, PIR, etc. LINQ8ACM(CB) will route power to a variety of access control hardware

devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both

Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring,

or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually

selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power

to multiple LINQ8ACM(CB) modules. This feature allows you to distribute the power over more outputs

for larger systems. Built-in LINQ

Network Power Management facilitates monitoring, reporting and

control of power/diagnostics.

LINQ8ACM and LINQ8ACMCB have built-in LINQ technology which facilitates monitoring, reporting,

and control of one (1) or two (2) low voltage AC or supervised DC power supply/chargers over the

network. They report diagnostics via Email and Windows Dashboard Alert notifications, greatly

reducing system downtime and eliminating unnecessary service calls. LINQ8ACM and LINQ8ACMCB

retrofit with most currently installed multi-output power supply/chargers.

4.9"(124.5mm)

2.4"

(61mm)

6.7" (170.2mm)

3.7"

(94mm)

8’ (203.2mm)

4.5"

(114.3mm)

Board Dimensions (L x W x H) and Drawing

8” x 4.5” x 1.25” (203.2mm x 114.3mm x 31.8mm)

Mounting Holes’ Tolerance: +/- 0.04 in. (1mm).

LINQ8ACM

PAGE 1
™ LINQ8ACM and LINQ8ACMCB Network Access Power Controllers Description Altronix LINQ8ACM and LINQ8ACMCB are dual input network access power controllers which can be installed in Altronix wall and rack mount enclosures to facilitate access control deployment. Access Power Controller’s dual input design allows power to be steered from one (1) or two (2) independent low voltage 12 or 24 VDC Altronix power supplies to eight (8) independently controlled fuse (LINQ8ACM) or PTC (LINQ8ACMCB) protected outputs.
PAGE 2
™ LINQ8ACM and LINQ8ACMCB Network Access Power Controllers Specifications Input Two (2) Independent Low Voltage Inputs. Input Voltage Options: Single Input: Input1: 12 or 24 VDC from eFlow series power supply. Dual Input Option 1: - Input 1: 12 or 24 VDC from eFlow series power supply. - Input 2: a) 12 or 24 VDC from eFlow series power supply. b) 5 or 12 VDC from VR6 voltage regulator. Dual Input Option 2: 12 and 24 VDC from Tango1B PoE Driven Power Supply.